Xerox BR1694 manual Choose where to send files My computer or My mobile device

Overview of Installing the Eye-Fi Software and Setting the Initial Card Options

The Eye-Fi card is now registered and activated to your Eye-Fi account

Do not select My computer unless you have your wireless network login information

Note

Attach the Eye-Fi card to the computer (in the scanner or use an SDHC memory card reader)

Launch the installer for your operating system from the Eye-Fi card

Eye-Fi Helper starts and Eye-Fi Center opens

Log into Eye-Fi account or create account

Follow configuration prompts on- screen to set initial Eye-Fi card file transfer options

Choose where to send files (My computer or My mobile device)

The Eye-Fi card is detected as a disc drive and contains the setup program for the software you need to install on your computer.

The latest installer automatically downloads if the computer has Internet access

Eye-Fi Center checks and downloads Eye-Fi card firmware if an update is available online

If prompted, update the

Eye-Fi card firmware following the steps on-screen

Select your wireless network and input the password

Either leave the default selection to set file sharing later, or select the second option and choose the file share site that you use.

Close the window and power cycle the scanner (or remove the Eye-Fi card from the memory card reader, if you are using one, and then insert it into the scanner)

Go to flowchart overview of how file transfer to a Computer and Online works

Note

If you enable file sharing you will need your account information for the site you choose (ex: Picasa). Follow the dialogues on screen to setup this feature.

Creating an account, using the site, and the purpose of file sharing is outside the scope of these documents and will not be discussed in detail.

Select your mobile device type

Click Continue through each successive screen

(Do not download the mobile app at this time. Instead, follow the flow for mobile devices)

Close the Window and power cycle the scanner (or remove the Eye-Fi card from the memory card reader, if you are using one, and then insert it into the scanner)

Go to flowchart of overview of how file transfer to a Mobile Device works