Sylvania LD200SL8 Marker Setup, To set a marker, To return to the marker later, e.g. DVD

Marker Setup

This feature allows you to assign a specific point on a disc to be called back later.

DVD CD

To set a marker

1During playback, press [MODE] repeatedly until “”/“” appears.

e.g.) DVD

_ _ /12 (SEARCH)

2Use [Cursor K/L] repeatedly until marker search menu appears.

or

3Use [Cursor s / B] to select an available marker within 60 seconds.

or

4When the playback reaches the point at which you want to set a marker, press [ENTER].

• Marker is now set.

5Press [RETURN] to exit.

	INTRODUCTION
To return to the marker later	CONNECTION

1To select a desired marker, repeat steps 1 to 3 in “To set a marker“.

e.g.) DVD INITIAL

or SETTING

2Press [ENTER] at the desired marker to start playback from the specific point which you set.

	WATCHING TV
Note:
• Marker Search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.	OPTIONAL
press [CLEAR].
• To clear a marker, select the marker to be cleared, and then
• Ejecting the disc or turning off the power will erase all mark-	SETTING
ers.
• Selecting “ ” at step 3 in the section “To set a marker”
will also erase all markers.
	OPERATING DVD
	DVD SETTING
	TROUBLESHOOTING
	INFORMATION

37

EN