Sylvania LD200SL8 owner manual 5Closed Caption, CAPTION2 and TEXT2

5Closed Caption

TV

You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CAPTION”, then press [ENTER] repeatedly to change the setting.

e.g.) digital TV mode

	- TV SETUP	-
	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
or	BACK LIGHT	[BRIGHT]
	COLOR TEMP.	[NORMAL]
	DTVCC

[OFF]

[CAPTION1]

[CAPTION2]

[TEXT1]

[TEXT2]

[Caption Mode]

CAPTION1 and TEXT1;

are the primary caption and text services.

The captioning or text is displayed in the same language as the program’s dialogue

(up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

CAPTION2 and TEXT2;

are rarely available and broadcasters use them

only in special conditions, such as when “CAPTION1” or “TEXT1” is not available.

•There are 3 display modes according to programs: Paint-on mode: Displays input characters on the TV

screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines).

3Press [SETUP] to exit.

Note:

•To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

•Not all TV programs and commercials have the closed caption or all types of the closed caption.

•Captions and texts may not match the TV voice exactly.

•Changing channels may delay the closed caption for a few seconds.

•Adjusting or muting the volume may delay the closed caption for a few seconds.

•Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a problem with the unit.

•The caption or text characters will not be displayed while the main menu or functions display is shown.

•If a black box appears on the TV screen, this means that the closed caption is set to TEXT mode. To clear the box, select “CAPTION 1”, “CAPTION 2” or “OFF”.

•If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

-Automobile ignition noise

-Electric motor noise

-Weak signal reception

-Multiplex signal reception (ghosts or screen flutter)

•The unit retains the closed caption setting if the power fails.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION

21

EN