Sylvania LD200SL8 5DVD Menu, 5Resume Playback, Pause, Operating Dvd, Before you begin

OPERATING DVD

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

5Playback

Before you begin:

Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver are set to the correct input mode.

1Press [POWER] to turn on the unit.

2Insert a disc with label facing back from the left side of the unit.

• In case the DVD was recorded on both sides, make

sure the label of the side you want to play back is

facing back.

Note:

• “” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.

•Some DVD may start playback from title 2 or 3 due to specific programs.

•During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.

5DVD Menu

DVD

Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.

Press [MENU] to call up the disc menu.

Use [Cursor K / L / s / B] to select an item, then press

[ENTER] (or [PLAY B]).

Note:

•Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

• The unit switches to the DVD mode when the unit

was in TV mode.

3Press [PLAY B]. Playback will start.

•If playback does not start automatically, press [PLAY B] again.

5Resume Playback

Press [STOP C] during playback. Resume message will appear on the TV screen.

Press [PLAY B]. Playback will resume from the point at which playback was stopped.

Resume ON

Press 'PLAY' to play from here. To play the beginning,

press 'STOP' first and then 'PLAY'.

4Press [STOP C] to stop playback temporarily.

•If playback remains stopped for 5 minutes, the screen saver program will activate automatically, when “SCREEN SAVER“ is set to “ON“.

5Press [EJECT] to eject the disc.

Note:

•To cancel resume, press [STOP C] one more time in the stop mode. On some discs, [STOP C] will not work while the resume message appears. Please wait until the message disappears.

•For MP3 files, playback will resume from the beginning of the current file.

•The resume information will be kept even when unit is turned off. However, ejecting the disc will cancel the resume feature. Playback will start at the beginning the next time you insert the disc.

5Pause

Press [PAUSE F] during playback.

•Playback will be paused and sound will be muted.

To continue playback, press [PLAY B].

28

EN