Chicago Electric 91780 operating instructions Operation, Preparing the Wire Rope

Page 10

Solenoid Assembly (34w)

Socket (6s)

Switch

Assembly

(35w)

Socket Cover (2s)

Figure 9

6.Lift the Socket Cover (2s) on the Solenoid Assembly (34w) and insert the Switch Assembly (35w) connector into the Socket (6s). Disconnect the Switch Assembly when not in use.

Note: The attachment of the Motor Cables (17s & 24s) determines the way the toggle button on the Switch Assembly (35w) operates. After the unit is mounted and powered, check the direction of the Power In and Power Out on the Switch button. To change the direction on the Switch, disconnect the Battery Cables from the battery, switch the Motor Cable connections on the Motor terminal, then reconnect the Battery Cables.

Preparing the Wire Rope

BEFORE FIRST USE:

1.The wire rope must be properly coiled under tension to be able to support a load without damage.

2.Uncoil the wire rope, except for 5 full wraps.

3.Recoil the wire rope back into the winch under at least 500 lb. of tension.

OPERATION

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

The instructions that follow are basic guidelines only and cannot cover all situations encountered during use. The operator and assistants must carefully plan usage to prevent accidents.

1.Examine the wire rope. Do not use the winch if the wire rope is frayed, kinked or damaged.

2.Fully charge the vehicle’s battery.

3.Check the winch’s electrical connections. All connections must be tight and clean.

4.Put the vehicle’s transmission in Neutral.

5.If the vehicle where the winch is mounted is not supposed to move, engage the emergency brake and block the wheels using wheel chocks.

6.To pull out the wire rope, move the Cam Ring (11w) to the OUT position, slide the loop of the Hook Strap (46w) over the hook, then pull on the Hook Strap to pull out the wire rope.

WARNING! Leave at least five full turns of wire rope on the drum.

Page 10

For technical questions, please call 1-800-444-3353.

SKU 91780

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions or replacement parts, please call 500 LB. Capacity 12 Volt Winch with Roller FairleadSave this Manual Installation PrecautionsFor technical questions, please call Operation Precautions Service Precautions No Locking MechanismComponents Line Pull and Wire Rope Capacity by LayerUnpacking Performance of First LayerMounting the Winch Installation and SetupMounting using the Mounting Frame Sold separately SKU Hardware IdentificationMounting using a different mounting plate Mounting the Solenoid AssemblyMounting Components Solenoid Assembly 34w Mounting Frame Wiring To Prevent Serious InjuryPreparing the Wire Rope OperationDo not anchor the cable back to the winch or winch mount Double Line RiggingSKU For technical questions, please call For technical questions, please call Cleaning, Maintenance, Lubrication Maintenance ServicingCable Replacement Troubleshooting Problem Possible Causes Likely SolutionsPart Description Winch Parts List & Assembly DiagramQty Part Description Solenoid Parts List & Assembly Diagram QtyRoller Fairlead Parts List & Assembly Diagram Record Product’s Serial Number HereMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

91780 specifications

The Chicago Electric 91780 is a versatile and highly regarded tool in the realm of woodworking, primarily known for its exceptional performance as a thickness planer. This device is designed to cater to both amateur woodworkers and seasoned professionals, making it an essential addition to any workshop.

One of the standout features of the Chicago Electric 91780 is its powerful 15 amp motor. This robust motor enables the planer to tackle various types of hardwoods with ease, allowing users to achieve smooth and consistent finishes. With an impressive planing capacity of up to 6 inches in thickness and a maximum width of 12 inches, the 91780 excels at handling substantial workpieces, making it ideal for projects that require precision and efficiency.

Additionally, the Chicago Electric 91780 is equipped with a durable, steel cutter head that houses two high-speed steel blades. This design not only enhances cutting performance but also contributes to prolonged blade life. Users can expect a clean, accurate cut, thanks to the planer’s ability to make passes at varying depths, which can be adjusted to suit the specific needs of any job.

The user-friendly design of the 91780 ensures that even those unfamiliar with thickness planers can operate it with confidence. The machine features an easy-to-read depth adjustment knob, allowing users to quickly set the desired thickness. Furthermore, the built-in dust port helps maintain a clean workspace by efficiently removing wood shavings and debris during operation.

In terms of safety, the Chicago Electric 91780 includes several safety features such as a safety lock switch that prevents accidental starts, ensuring that users can operate the tool safely. The sturdy construction of the machine, combined with non-slip feet, guarantees stability during operation, reducing vibrations and enhancing overall control.

Overall, the Chicago Electric 91780 thickness planer combines power, precision, and user-friendly features, making it an excellent choice for anyone involved in woodworking. Its performance, durability, and safety elements provide users with the confidence to tackle a wide range of projects, ensuring each piece of wood is transformed with the utmost care and accuracy. Whether one is crafting furniture, cabinetry, or intricate wood designs, the Chicago Electric 91780 stands out as a reliable partner in achieving flawless results.
Top Page Image Contents