Chicago Electric 91780 Troubleshooting, Problem Possible Causes Likely Solutions

Page 14

Troubleshooting

Problem

 

Possible Causes

 

Likely Solutions

Motor does not turn

1. Switch not connected properly.

1.

Connect Switch properly.

on.

2. Loose power cord connections.

2.

Tighten all connections.

 

3.

Battery needs charging.

3.

Fully charge battery.

 

4.

Solenoid malfunctioning.

4.

Tap solenoid to loosen contacts. Briefly

 

 

 

 

apply 12 volts directly to coil terminals.

 

 

 

 

Clicking indicates proper activation.

 

5.

Defective Switch.

5.

Replace Switch.

 

6.

Defective motor.

6.

Check for voltage at armature port with

 

 

 

 

Switch pressed. If voltage is present, replace

 

 

 

 

motor.

 

7.

Water has entered motor.

7.

Allow to drain and dry. Run in short bursts

 

 

 

 

without load until completely dry.

 

8.

Internal damage or wear.

8.

Have technician service winch.

Motor runs but cable

Clutch not engaged.

Move the Cam Ring to the In position. If

drum does not turn.

 

 

problem persists, a qualified technician needs

 

 

 

to check and repair.

Motor runs slowly

1. Insufficient current or voltage.

1.

Battery weak, recharge. Run winch with

or without normal

 

 

 

vehicle engine running.

power.

2.

Loose or corroded battery cable

2.

Clean, tighten, or replace.

 

 

connections.

 

 

 

3.

Incorrect power cords.

3.

Use only supplied power cords.

Motor runs in one

1. Defective or Stuck solenoid.

1.

Tap Solenoid to loosen contacts. Repair or

direction only.

 

 

 

replace solenoid.

 

2.

Defective Switch Assembly.

2.

Replace Switch Assembly.

Motor overheats.

1. Incorrect power cords.

1.

Use only supplied power cords.

 

2.

Winch running time too long.

2.

Allow winch to cool down periodically.

Follow all safety precautions whenever diagnosing or servicing the winch. Disconnect power supply before service.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 14

For technical questions, please call 1-800-444-3353.

SKU 91780

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For technical questions or replacement parts, please call 500 LB. Capacity 12 Volt Winch with Roller FairleadFor technical questions, please call Installation PrecautionsSave this Manual Operation Precautions Service Precautions No Locking MechanismComponents Line Pull and Wire Rope Capacity by LayerUnpacking Performance of First LayerMounting the Winch Installation and SetupMounting using the Mounting Frame Sold separately SKU Hardware IdentificationMounting Components Mounting the Solenoid AssemblyMounting using a different mounting plate Solenoid Assembly 34w Mounting Frame Wiring To Prevent Serious InjuryPreparing the Wire Rope OperationSKU For technical questions, please call Double Line RiggingDo not anchor the cable back to the winch or winch mount For technical questions, please call Cable Replacement Maintenance ServicingCleaning, Maintenance, Lubrication Troubleshooting Problem Possible Causes Likely SolutionsQty Part Description Winch Parts List & Assembly DiagramPart Description Solenoid Parts List & Assembly Diagram QtyRoller Fairlead Parts List & Assembly Diagram Record Product’s Serial Number HereMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

91780 specifications

The Chicago Electric 91780 is a versatile and highly regarded tool in the realm of woodworking, primarily known for its exceptional performance as a thickness planer. This device is designed to cater to both amateur woodworkers and seasoned professionals, making it an essential addition to any workshop.

One of the standout features of the Chicago Electric 91780 is its powerful 15 amp motor. This robust motor enables the planer to tackle various types of hardwoods with ease, allowing users to achieve smooth and consistent finishes. With an impressive planing capacity of up to 6 inches in thickness and a maximum width of 12 inches, the 91780 excels at handling substantial workpieces, making it ideal for projects that require precision and efficiency.

Additionally, the Chicago Electric 91780 is equipped with a durable, steel cutter head that houses two high-speed steel blades. This design not only enhances cutting performance but also contributes to prolonged blade life. Users can expect a clean, accurate cut, thanks to the planer’s ability to make passes at varying depths, which can be adjusted to suit the specific needs of any job.

The user-friendly design of the 91780 ensures that even those unfamiliar with thickness planers can operate it with confidence. The machine features an easy-to-read depth adjustment knob, allowing users to quickly set the desired thickness. Furthermore, the built-in dust port helps maintain a clean workspace by efficiently removing wood shavings and debris during operation.

In terms of safety, the Chicago Electric 91780 includes several safety features such as a safety lock switch that prevents accidental starts, ensuring that users can operate the tool safely. The sturdy construction of the machine, combined with non-slip feet, guarantees stability during operation, reducing vibrations and enhancing overall control.

Overall, the Chicago Electric 91780 thickness planer combines power, precision, and user-friendly features, making it an excellent choice for anyone involved in woodworking. Its performance, durability, and safety elements provide users with the confidence to tackle a wide range of projects, ensuring each piece of wood is transformed with the utmost care and accuracy. Whether one is crafting furniture, cabinetry, or intricate wood designs, the Chicago Electric 91780 stands out as a reliable partner in achieving flawless results.
Top Page Image Contents