Revolabs 2 setup guide Requirements for connecting systems

Revolabs Solo™ Single-Channel – Polycom® SoundStation 2 Setup Guide

NOTES AND CAUTIONS:

This setup guide will guide you through the steps needed to properly connect a Revolabs Single-Channel device to a Polycom SoundStation 2 speakerphone.

1.Connecting the Cables

2.Configuring the SoundStation 2 speakerphone

Note: It is important to carefully follow these instructions in order and completely. Otherwise, your Single-Channel System and/or the phone may not function properly. Please read through these instructions completely before proceeding. Contact Revolabs Technical Support if you have any questions.

IMPORTANT: This will only work with the SoundStation 2 with LCD screen (expandable version – P/N 2201-16200-601).The SoundStation 2 models without LCD screen or the expandable capability do not have the ability to activate an external wireless microphone.

Requirements for connecting systems:

1.Revolabs Single-Channel system

2.Polycom SoundStation 2 speakerphone with LCD screen

3.Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single- channel system)