Assembly
Peg 3 | Peg 4 |
Roller | Roller |
|
Peg 5
Peg 2
Peg 1 | Peg 6 |
|
16 | Roller | Roller |
|
•Fit the other six slots on the seat pad to the corresponding pegs on the seat ring.
•Tuck the seat pad behind all four rollers.
Seat with
Pad
Hole
in Seat Base 
17
Connectors
18
•Tip the end of the product up and locate the wire connectors.
•Fit the connectors together. If they will not go together easily, do not force them together. Turn one or the other connectors over, and try again!
One-time assembly is now complete.
•Insert and “snap” the seat with pad into the hole in the seat base.
•Pull up on the seat to be sure it is secure.
8