settings options
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.
settings |
| contents | |
|
|
|
|
Normal | Standard brightness. |
| None |
Bright | Brightens the LCD screen. |
| None |
|
|
|
|
•A brighter LCD screen setting consumes more battery power.
•If you adjust the LCD brightness when the ambient lighting is too bright, it is hard to see the LCD screen indoors.
•LCD Brightness does not affect the brightness of images to be stored.
Auto LCD Off
To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is idle for more than 2 minutes.
settings | contents | ||
Off | Disables the function. | None | |
|
|
| |
On | When there is no operation for more than 2 minutes in the STBY mode or during recording, | None | |
the power saving mode starts with the LCD screen dimmed. | |||
|
| ||
|
|
|
•When this “Auto LCD Off” function is enabled, you can press any button on the camcorder to return LCD brightness to normal.
•Auto LCD Off will be disabled in the following cases: - If the DC power cable (AC power adaptor) is connected.
Beep Sound
You can set the beep sound to on/off. If there is a beep sound when operating the menu settings, the setting is turned on.
settings | contents | |
|
|
|
Off | Disables the function. | None |
|
|
|
On | When on, a beep will sound every time a button is pressed. | None |
|
|
|
The Beep sound function is canceled in the following cases:
-During recording, playing
-When the camcorder has a cable connection. (component/AV cable)
58_English