2 | FlexCam iCam — Introduction |
Important safeguards
Before operating the FlexCam iCam, please read the entire manual thoroughly. The FlexCam iCam was designed, built and tested for use indoors. The use of a power supply other than the one provided or outdoor operation has not been tested and could damage the camera or peripheral equipment and/or create a potentially unsafe operating condition.
•Do not operate the FlexCam iCam if the power cord is damaged or if the camera has been dropped or damaged. A qualified service technician must examine the FlexCam iCam before operating.
•Position the cord so that it will not be tripped over, pulled on or come into contact with hot surfaces.
•Always unplug the FlexCam iCam from the electrical outlet before cleaning or servicing.
•To reduce the risk of electric shock, do not immerse in water or other liquid.
!Use only the power supply provided with the FlexCam iCam. Use of any unauthorized power supply will void any and all warranties.
Handling the camera
•All ClearOne cameras are for indoor use only.
•Do not use cameras next to food or beverages. Cameras have been tested and approved for use in chemistry labs. However, be very careful not to spill liquid or dry chemicals or solvents on the camera.
•Do not use cameras right next to working TVs, radios, motors, transformers or magnetic fields.
•Avoid touching the lens.To clear any dust, blow pressurized air onto the lens. For accidental smears or smudges, wipe carefully with a lens cleaning cloth.
•Clean exterior of camera by wiping with a clean, damp cloth; do not use any abrasive chemicals.
•Use both hands whenever adjusting the neck of the camera; this will avoid any unnecessary strain on the camera’s base and will keep the camera from tipping over unexpectedly.
•Do not attempt to take the camera apart. There are no
•Do not direct the lens of the camera toward the sun. This may damage the camera.
Operating and storage conditions
Do not store or operate the camera under the following conditions:
•Outdoors or connected to outdoor or auxiliary power sources.
•In environments with high humidity.
•In inclement weather.
•Under severe vibration.
FlexCam iCam — Introduction |
| 3 |
|
Unpacking
Carefully remove the FlexCam iCam unit, cables and power supply from the packaging. Ensure that you received the following parts:
FlexCam iCam | Plug | 12 VDC Power Supply | 12' |
Microscope Couplers | FlexCam iCam | |
26 mm, 28 mm and |
| Manual |
34 mm |
|
|
|
| Figure 1. FlexCam iCam and accessories |
ClearOne is not responsible for product damage incurred during shipment. You must make claims directly with the carrier. Inspect your shipment carefully for obvious signs of
damage. If the shipment appears damaged, retain the original boxes and packing material for inspection by the carrier. Contact your carrier immediately.
Technical Services Group ~ | Technical Services Group ~ |