12 | FlexCam iCam — Appendix |
In case of unsatisfactory operation, the end user shall promptly notify the Manufacturer at the address set forth below in writing, giving full particulars as to the defects or unsatisfactory operation. Upon receipt of such notice, the Manufacturer will give instructions respecting the shipment of the product, or such other matters as it elects to honor this warranty as above provided. This warranty does not cover damage to the product during shipping and the Manufacturer assumes no responsibility for such damage. All shipping costs shall be paid by the customer.
This warranty extends only to the original end user and is not assignable or transferable.This warranty is governed by the laws of the State of Utah, without regard to the conflicts of interests provisions thereof.
ClearOne Communications Inc.
1825 Research Way
Salt Lake City, Utah 84119
FCC Part 15/ICES-003 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules and Industry Canada
Operation is subject to the following two conditions: (1) This device may not cause interference, and
(2)This device must accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by ClearOne Communications could void the user's authority to operate the equipment.
European Compliance
This equipment has been approved in accordance with Council Directive 1999/5/EC "Radio Equipment and Telecommunications Equipment". Compliance of the equipment with the Directive is attested by the application of the CE mark on the equipment.
EC Declaration of Conformity |
|
Application of Council Directive(s): | 1999/5/EC Radio equipment and |
| Telecommunications Terminal Equipment |
| (R&TTE) Directive |
Manufacturer's Name: | ClearOne Communications |
Manufacturer's Address: | 1825 West Research Way Salt Lake City, |
| Utah 84119 U.S.A. |
Model No.: | FlexCam iCam |
| FlexCam iCam Digital |
FlexCam iCam — Appendix |
| 13 |
|
Standard(s) to which Conformity is declared:
89/336/EEC "Electromagnetic Compatibility (EMC) Directive":
EN 55022: 1994 (Emissions) | Specification for limits and methods of measurement of |
| radio interference characteristics of information |
| technology equipment |
EN | Part 3: Limits - Section 2: Limits for harmonic |
| current emissions. |
EN | Section 3: Limitation of voltage fluctuations and |
| flicker in low voltage supply systems for equipment |
| with rated current up to and including 16 A |
EN 55024: 1998 (Immunity) | Information technology equipment |
| characteristics - Limits and methods of |
| measurement |
EN | Electrostatic Discharge |
EN | Radiated RF Immunity |
EN | Electrical Fast Transients |
EN | Lighting Surge |
EN | Conducted RF Immunity |
EN | Voltage Dips and Voltage Interruptions |
73/23/EEC "Low Voltage Directive (LVD)": |
|
IEC | Safety of Information Technology Equipment, |
| Including Electrical Business Equipment |
We, the undersigned, hereby declare that the equipment specified above conforms to the above Directives and Standards.
Manufacturer | Legal Representative in Europe |
Signature |
| Signature | |||
Roger J. Midgley |
| Martin Offwood | |||
|
|
|
|
| |
Full Name |
| Full Name | |||
Project Manager |
| Managing Director EMEA North | |||
|
|
|
|
|
|
Position |
| Position | |||
Technical Services Group ~ | Technical Services Group ~ |