Align
Now let’s align your VholdR. Remember, there is no screen so the lasers are designed to give you a visual level of what you will be shooting.
rotate lens to align lasers horizontally
press and hold for (1) second
aim lasers
1Assume the riding position. Then press and hold the power button for one second until the lasers turn on. Lasers will show for 5 seconds.
CAUTION: Avoid staring directly into the laser beams.
2Aim the two laser points at your hand, a wall, or object in front of you. Rotate the FRONT of the VholdR lens and/or adjust the mount until the lasers are aligned HORIZONTALLY. This ensures the horizon is correctly aligned.
Note: There is a limit of just over 90 degrees in either direction so if you reach that point try rotating the lens in the opposite direction or adjust the mounting position.
Record Video
When sliding the switch all the way forwards or backwards you will feel a slight click to indicate the switch is in the final position.
stop 
record
•Start Recording: Slide the record switch forward towards the lens.
Indicator: you will hear (1) beep. The red power light (in front) will blink.
•Stop Recording: Slide the record switch back against the rear door.
Indicator: you will hear two beeps. The red power light (in front) will stop blinking.
Note: Slide the switch all the way forward and backwards until you feel a slight click to indicate the switch is in its final position. Be patient with hearing the beeps, but if you do not hear the proper beeps please see Tips and Troubleshooting.
14
Align | Record Video |
15