Cobra Digital DC4330 manual Preparation before use, Storage Medium

Page 6

5) Arrow button:

Left arrow (“”): In playback mode, it is used to select image; In menu mode, it is used for

selecting menu; In MP3 mode, it is used to select previous song.

Right arrow (“”): In playback mode, it is used to toggle white-balance mode; in menu mode, it is used to select menu; In MP3 mode, it is used to select next song.

Up arrow (“”): In play mode, it is used to zoom in TFT display; in menu mode, it is used to select menu; In MP3 mode, it is used to increase volume.

Down arrow (“”): In playback mode, it is used to zoom out TFT display; In menu mode, it is used to select menu; In MP3 mode, it is used to decrease volume.

4. Storage Medium

Storage medium includes built-in memory and external memory cards (SD/MMC cards)

Storage method: When there is no SD/MMC present, images, video clips and files transferred into the camera through USB cable are all stored inside built-in memory; When there is SD/MMC card present, they are all stored inside SD/MMC card.

Reading Sequence: When there is no SD/MMC present, Playback on TFT screen and files browsed from Computer via USB cable are all read from built-in memory; when there is SD/MMC present, they are all read from SD/MMC card.

2. Preparation before use

1.Loading of battery

i.Open the battery tank cover as per figure-3

ii.As indicated in the battery tank cover (“+/-”), load 3 x AAA batteries into the tank with positive-to-positive, and negative-to-negative as per figure-4. (Ni-HM rechargeable is recommended).

Batter y tank

SD card Slot

Figure-3

Figure-4

iii.Close the battery tank cover.

5

Image 6
Contents User’s Guide Security Precaution PrefaceSpecial Attention Contents Brief Introduction TFT ScreenPreparation before use Storage MediumFeature and specifications of camera Operations Setup English Franceis Deutsch Espanol Chinese Exit Use left and right key to select ,and confirm Software Installation WINME/XP Image downloading Features and specification Maintenance