4. Operations
1. Power on/off
Make sure that you have loaded the batteries. Press and hold the power button for 1~2 seconds, the camera is powered on with flash of power indicator and TFT screen on. Please press and hold the power button for 1~2 seconds again to power off. The camera will be powered off with flash of power indicator and TFT screen off. (Notes: you should get the batteries out of camera for long time storage, otherwise the camera may be damaged by possible leakage of battery)
2. Inspection of battery level
When TFT screen is on, a battery level indicator icon will show on the left bottom of the screen. 3 level of battery can be displayed:
: Normal battery level
: Low battery level
: Out of power and will power off automatically soon
When the camera is out of power, it will alert you that it is out of power and shut itself off automatically.
OFF
3. Capture of images / video
After
1)Capture mode:
Use left and right arrow button (“
” and “
”) to select
capture mode “ | ”, and then press OK button to confirm. TFT | ||
| |||
screen will pop up extended menu: “ | ”, “ ”, and “ ” | OFF | |
(as per |
|
|
|
: Single image mode |
|
| |
：Video clips mode |
|
| |
: Continuous image mode (3 images) |
| ||
The default mode is single image mode |
| ||
|
|
| |
2)Image quality mode
In browse mode, “S”, “H”, “F”, “B” and “E” indicate image quality. The switching of image
quality mode is controlled by main control menu.
S:image xize is 2432 X 1824
H:image size is 2048 X 1536
F:imgae size is 1600 X 1200
B:image size is 1280 X 960
E:imgae size is 640 X 480 The default mode is F.
7