Yamaha RX-V630RDS owner manual Speaker SET speaker mode settings, On the front panel

5 Press j / i repeatedly to		PRESET/CH
change the setting of the	–		+
item.		SELECT

6 Press u/d repeatedly until the menu disappears or simply press one of the DSP program group buttons to exit SET MENU.

		PRESET/CH					HALL	JAZZ CLUB	ROCK	ENTER-
									CONCERT	TAINMENT
							1	2	3	4
							TV	MONO	MOVIE	MOVIE
–				+		or	SPORTS	MOVIE	THEATER 1	THEATER 2
		SELECT					5	6	7	8
							/DTS		EX/ES	STEREO
							SUR.	SELECT
							9	0	+10	ENTER
										EFFECT
■ DSP-AX630SE				On the front panel
									INPUT	VOLUME
							INPUT M0DE			6CH INPUT
	NATURAL SOUND AV RECEIVER
STANDBY
/ON
							BASS	TREBLE
SILENT	SPEAKERS								VIDEO AUX
	A	B	STEREO	PROGRAM	–	SET MENU +	NEXT
							–	+

4	3	1,2,4
1 Press NEXT to enter the			NEXT
SET MENU.
2 Press NEXT repeatedly to			NEXT
select the item you want
to adjust.
3 Press SET MENU –/+			– SET MENU +
repeatedly to change the
setting.

SET MENU

1SPEAKER SET (speaker mode settings)

Use this feature to select suitable output modes for your speaker configuration.

Notes

•When 96-kHz sampling digital signals are input to this unit, some items are not affected.

•When 6CH INPUT is selected as the input source, level adjustments in items 1A through 1E are not affected.

■1A CENTER (center speaker mode)

By adding a center speaker to your speaker configuration, this unit can provide better dialog localization for several listeners and superior synchronization of sound and images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker.

SML

Select this if you have a small center speaker. The low- frequency signals (90 Hz and below) of the center channel are directed to the speakers selected with “1E BASS”.

NON

Select this if you do not have a center speaker. All of the center channel signal are directed to the main left and right speakers.

OPERATION ADVANCED

4 Press NEXT repeatedly until the menu disappears or simply press PROGRAM l / h to exit the SET MENU.

PROGRAM NEXT

or

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again.

English

43