Yamaha RX-V620RDS owner manual Tuning, Connecting the Antennas, Connecting the indoor FM antenna

Page 32

TUNING

Connecting the Antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength.

Connect each antenna correctly to the designated terminals.

AM loop

 

Indoor FM

antenna

 

antenna

(included)

 

(included)

 

 

 

TUNER

AM ANT

GND

FM ANT

 

 

75 UNBAL.

3 Release the tab to lock the lead wires.

Lightly pull the lead wires to confirm a good connection.

4 Attach the loop antenna to the antenna stand.

5 Orient the AM loop antenna so that the best reception is obtained.

y

•The AM loop antenna can be removed from the stand and attached to a wall, etc.

Ground (GND terminal)

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

■Connecting the indoor FM antenna

Connect the included indoor FM antenna to the FM ANT 75Ω UNBAL. terminal.

Note

•Do not connect an outdoor FM antenna and the indoor FM antenna at the same time.

■Connecting the AM loop antenna

3

1

 

4

2

 

 

5

Antenna stand

1 Press and hold the tab to unlock the terminal hole.

2 Insert the AM loop antenna lead wires into the AM ANT and GND terminals.

Notes

•The AM loop antenna should be placed away from this unit.

•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.

Connecting a coaxial cable to the included

75-ohm/300-ohm antenna adapter (U.K. model only)

1

2

(7/16)

 

 

11

Unit: mm

 

8

(5/16)

 

(inch)

Cover

6

(1/14)

 

 

 

 

Open the cover of the

Cut the external sleeve of

included 75-ohm/300-ohm

the 75-ohm coaxial cable

antenna adapter.

and prepare it for

 

connection.

 

3

 

 

 

Lead wire

Cut the lead wire and remove it.

4

5

Clamp

Clamp with

with

pliers.

pliers.

 

Insert the wire into the slot.

Snap the cover into

Insert the cable wire into the place. slot, and clamp it with

pliers.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents RX-V620RDS For U.K. customers Special Instructions for U.K. ModelContents Features Multi-Mode Digital Sound Field ProcessingControl Checking the Package ContentsGetting Started Front Panel PRESET/TUNING Edit Tuning Mode AUTO/MAN’L MonoBass TrebleRemote Control Effect When selecting an input sourceDescription of the Numeric Buttons Using the Remote Control When selecting a preset station numberHandling the remote control See Setting the Manufacturer Code for setting the codeFront Panel Display Rear Panel AC OutletsSpeakers to Be Used Speaker SetupSpeaker Placement Before Connecting Components ConnectionsCD player Turntable MD recorder Or CD recorderConnecting Video Components Video monitor with a 21-pin connectorAbout the video jacks Video AUX jacks on the front panelWhen using an LD player Monitor SCART-plugDVD player No connectionConnecting the Speakers Subwoofer jack Main speakers aRight Left Europe model Right Left Subwoofer Center speakerConnecting an External Decoder Main jacksRear Surround jacks Center jacksImpedance Selector Switch Connecting the Power Supply CordsEurope model To AC outletOSD Modes Selecting the OSD ModeON-SCREEN Display OSD Summary of Speaker SET Items 1A through 1E Speaker Mode SettingsSetting indicated in bold Adjusting the Speaker Output Levels Adjust the volume so you can hear the test toneBefore You Begin Video monitor Press Speakers a or BPress Level repeatedly to select the speaker to be adjusted When the adjustment is complete, press TestSelect this To reproduce the signal from This component Basic PlaybackWhen you have finished using this unit To mute the soundInput Modes and Indications BGV background video functionEnglish On the remote control On the front panel Press DSP ProgramPress DSP Turn the multi jog knob to select the programNormal Stereo Reproduction Virtual Cinema DSP and Silent CinemaVirtual Cinema DSP Silent CinemaTuning Connecting the AntennasConnecting the indoor FM antenna Connecting the AM loop antennaAutomatic or Manual Tuning Presetting Stations Automatically presetting stations for RDS stationsOn the remote control Tuning in to a Preset StationManually presetting stations Exchanging Preset Stations Description of RDS Data Changing the RDS ModeReceiving RDS Stations To cancel this function Program types in the PTY modePress PTY Seek Mode to set the unit PTY Seek mode PTY Seek FunctionEON Function FlashesFor DVDs and CDs encoded with DTS Special considerations when recording DTS softwareBasic Recording SET Menu Adjusting the Items on the SETAdjustment should be made with the remote control Speaker SET speaker mode settings 1A Center SP center speaker modeSET Menu LRG1B Main SP main speaker mode 1C Rear L/R SP rear speaker modeNone Large1D LFE/BASS OUT bass out mode 1E Main Level main level modeSwfr MainInput Mode initial input mode 4A CMPNT-V Input for Component Video jacks4C Optical in for the Optical Input jacks 4D Coaxial in for the Coaxial Input jackRange dynamic range Dolby D. SET Dolby Digital setDTS SET DTS LFE level OSD Shift OSD off-set position Center speaker imageAdjusting the Level of the Effect Speakers Press j / i to adjust the speaker output levelCanceling the Sleep Timer Sleep TimerSetting the Sleep Timer Selector Dial Remote Control FeaturesSelector Dial Position of the Selector Dial Controlling the Components Connected to This UnitControlling this unit Controlling your TVCD position Button Names and Functions in Each PositionTAPE/MD position tape deck, MD recorder or CD recorder DVD/LD position DVD Menu positionVCR position CBL/SAT position TV positionTo use a second and third VCR Setting the Manufacturer CodeIndicator flashes twice Make sure that the indicator flashes twice To return to the factory-set codes in all positionsTo return to the factory-set codes in each position Enter the code numberSound Field Program Hi-Fi DSP ProgramsCinema DSP Programs For audio sources Nos toFor movie programs Nos to Theater SpectacleMovie Theater 1 What is a sound field? Sound Field Program Parameter EditingSound Field Program Parameters Elements of a sound fieldChanging Parameter Settings Resetting a Parameter to Factory-set ValueProgram No. Program name group Parameters Example of the Movie TheaterSound Field Parameter Descriptions Room Size for the presence sound fieldFunction Surround sound field becomesDelay surround delay INIT.DLY surround initial delayCT.DELAY center delay LS.DELAY left surround delayRS.DELAY right surround delay Room Size surround room sizeTroubleshooting GeneralVolume level is No sound fromEffect speakers Rear speakersVolume level Other settings on this Unit cannot be Changed When Tuner isCannot be increased Or the sound is Distorted EffectTuner Remote control Specifications Glossary Video signal Component video signalPCM Linear PCM Sampling frequency and number of quantized bitsIndex Dolby D. SET SET MenuAdmiral KTV VCR Cable TVSatellite Tuner CD Player DVD PlayerLD Player Tape Deck CD RECORDER/CD-RWMD Recorder V722820-1 DVD player Quick Reference Card AMP/TUN DSP/TUNDVD/LD DVD Menu

RX-V620RDS specifications

The Yamaha RX-V620RDS is a powerhouse in the world of home theater receivers, offering outstanding sound quality and a range of features that make it a popular choice for audio enthusiasts. Launched during the late 1990s, the RX-V620RDS has become known for its versatility and robust performance, catering to the needs of both casual listeners and serious audiophiles.

One of the standout features of the RX-V620RDS is its multi-channel processing capability. Supporting 5.1 channels, this receiver allows users to enjoy surround sound experiences, making it ideal for movie nights and gaming sessions. The onboard Dolby Digital and DTS decoders ensure that audiences receive enveloping audio that enhances their overall experience. Moreover, the unit provides an impressive power output, delivering 90 watts per channel into 8 ohms, which means it can drive demanding speakers effortlessly.

In terms of connectivity, the Yamaha RX-V620RDS does not disappoint. It is equipped with multiple audio and video inputs, including composite and S-video inputs, along with a dedicated phono input for vinyl enthusiasts. For video sources, the receiver includes a variety of outputs, accommodating different types of displays, from standard CRT televisions to modern flat screens.

Another significant feature of the RX-V620RDS is the inclusion of the Radio Data System (RDS) tuner. This technology allows the receiver to display information such as station names and song titles, enhancing the radio listening experience. Alongside this, the receiver supports FM and AM bands, providing a wide spectrum of entertainment options.

The RX-V620RDS also showcases Yamaha's commitment to build quality and user experience. The intuitive on-screen display simplifies navigation through settings and configurations, ensuring that even those less familiar with tech can easily set up their systems. Additionally, the remote control is user-friendly, allowing effortless operation from anywhere in the room.

Furthermore, the RX-V620RDS integrates Yamaha's patented YPAO (Yamaha Parametric Room Acoustic Optimizer) technology, which automatically measures the room acoustics and adjusts the audio settings for optimum sound quality. This feature is particularly valuable in home theater setups, where room characteristics can greatly influence audio performance.

In conclusion, the Yamaha RX-V620RDS remains a noteworthy receiver that combines advanced features, solid performance, and user-friendly design. With its multi-channel processing, extensive connectivity options, and innovative technologies, it has rightfully earned its place as a reliable choice for anyone looking to elevate their home audio experience. Whether you are a music lover or a home theater aficionado, the RX-V620RDS is equipped to deliver impressive sound for years to come.
Top Page Image Contents