Yamaha RX-V620RDS owner manual Specifications

Page 70

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Main, Center, Rear

20 Hz to 20 kHz, 0.06% THD, 8 ohms

................................. 90 W

1 kHz, 0.06% THD, 8 ohms

100 W

• DIN Standard Output Power

 

[Europe model only]

 

1 kHz, 0.7% THD, 4 ohms

130 W

• IEC Output Power

 

[Europe model only]

 

1 kHz, 0.06% THD, 8 ohms

100 W

•Dynamic Power (IHF)

8/6/4/2 ohms

120/140/175/210 W

• Damping Factor

 

20 Hz to 20 kHz, 8 ohms

80 or more

•Frequency Response

CD to Main L/R

10 Hz to 100 kHz, –3 dB

•RIAA Equalization Deviation

PHONO (MM)

±0.5 dB

•Total Harmonic Distortion

PHONO MM (20 Hz to 20 kHz, 1 V, REC OUT) .... 0.02% or less

CD, etc. (20 Hz to 20 kHz, 45 W, 8 ohms, Main L/R)

............................................................................... 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

 

PHONO MM to REC OUT (5 mV, shorted)

81 dB or more

CD (250 mV, shorted) to Main L/R, Effect Off

.... 100 dB or more

• Residual Noise................................................................(IHF-A Network)

150 ∝V or less

Main L/R

• Channel Separation (1 kHz/10 kHz)

 

CD (5.1 kohms terminated) to Main L/R

60 dB/45 dB

• Tone Control (Main L/R)

 

BASS Boost/Cut

±10 dB/50 Hz

TREBLE Boost/Cut

±10 dB/20 kHz

BASS EXTENSION

+6 dB/60 Hz

• Phones Output

400 mV/560 ohms

• Input Sensitivity

 

CD, etc

150 mV/47 kohms

PHONO

2.5 mV/47 kohms

6CH INPUT

150 mV/47 kohms

• Maximum Input Signal

 

PHONO MM (1 kHz, 0.1% THD)

100 mV or more

CD, etc. (1 kHz, 0.5% THD)

2.2 V or more

• Output Level

 

REC OUT

150 mV/1.2 kohms

PRE OUT

2.1 V/1.2 kohms

SUBWOOFER

4.0 V/1.2 kohms

VIDEO SECTION

• Video Signal Type

PAL

• Composite Video Signal Level

1 Vp-p/75 ohms

•S-Video Signal Level

Y

........................................................................... 1 Vp-p/75 ohms

C

.................................................................... 0.286 Vp-p/75 ohms

•Component Video Signal Level

Y

/C..........................................................................., P /C

1 Vp-p/75 ohms

P

0.7 Vp-p/75 ohms

B

B R R

 

• Signal to Noise Ratio

50 dB or more

•Frequency Response (MONITOR OUT)

Composite, S-Video

5 Hz to 10 MHz, –3 dB

Component

DC to 30 MHz, –3 dB

FM SECTION

• Tuning Range

87.50 to 108.00 MHz

•50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono/Stereo

1.6 ∝V (15.3 dBf) /23 ∝V (38.5 dBf)

• Alternate Channel Selectivity (400 kHz)

75 dB

•Signal to Noise Ratio (IHF)

Mono/Stereo

81 dB/75 dB

•Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.1%/0.2%

•

Stereo Separation (1 kHz)

48 dB

•

Frequency Response (20 Hz to 15 kHz)

±1 dB

AM SECTION

• Tuning Range

531 to 1611 kHz

• Usable Sensitivity

300 ∝V/m

• Signal to Noise Ratio

52 dB

GENERAL

• Power Supply

AC 230 V/50 Hz

• Power Consumption

260 W

Standby Mode

0.9 W

•AC Outlets (Total 100 W maximum)

[Europe model]

2 (SWITCHED)

[U.K. model]

1 (SWITCHED)

• Dimension (W x H x D)

435 x 151 x 390 mm

• Weight

10.5 kg

• Accessories

Remote Control

....................................................................................... Batteries

......................................................................... AM loop antenna

...................................................................... Indoor FM antenna

................ 75-ohm/300-ohm antenna adapter (U.K. model only)

................................................................. Quick Reference Card

........................................................................ Connection Guide

* Specifications are subject to change without notice.

68

Page 69 Page 71
Image 70
Page 69 Page 71
Contents RX-V620RDS For U.K. customers Special Instructions for U.K. ModelContents Features Multi-Mode Digital Sound Field ProcessingGetting Started Checking the Package ContentsControl Front Panel Bass PRESET/TUNING EditTuning Mode AUTO/MAN’L Mono TrebleRemote Control Description of the Numeric Buttons When selecting an input sourceEffect Handling the remote control Using the Remote ControlWhen selecting a preset station number See Setting the Manufacturer Code for setting the codeFront Panel Display Rear Panel AC OutletsSpeaker Placement Speaker SetupSpeakers to Be Used Before Connecting Components ConnectionsCD player Turntable MD recorder Or CD recorderAbout the video jacks Connecting Video ComponentsVideo monitor with a 21-pin connector Video AUX jacks on the front panelDVD player When using an LD playerMonitor SCART-plug No connectionConnecting the Speakers Right Left Europe model Subwoofer jackMain speakers a Right Left Subwoofer Center speakerRear Surround jacks Connecting an External DecoderMain jacks Center jacksEurope model Impedance Selector SwitchConnecting the Power Supply Cords To AC outletON-SCREEN Display OSD Selecting the OSD ModeOSD Modes Setting indicated in bold Speaker Mode SettingsSummary of Speaker SET Items 1A through 1E Before You Begin Adjusting the Speaker Output LevelsAdjust the volume so you can hear the test tone Video monitor Press Speakers a or BPress Level repeatedly to select the speaker to be adjusted When the adjustment is complete, press TestSelect this To reproduce the signal from This component Basic PlaybackWhen you have finished using this unit To mute the soundInput Modes and Indications BGV background video functionEnglish Press DSP On the remote control On the front panelPress DSP Program Turn the multi jog knob to select the programVirtual Cinema DSP Normal Stereo ReproductionVirtual Cinema DSP and Silent Cinema Silent CinemaConnecting the indoor FM antenna TuningConnecting the Antennas Connecting the AM loop antennaAutomatic or Manual Tuning Presetting Stations Automatically presetting stations for RDS stationsManually presetting stations Tuning in to a Preset StationOn the remote control Exchanging Preset Stations Receiving RDS Stations Changing the RDS ModeDescription of RDS Data Press PTY Seek Mode to set the unit PTY Seek mode To cancel this functionProgram types in the PTY mode PTY Seek FunctionEON Function FlashesBasic Recording Special considerations when recording DTS softwareFor DVDs and CDs encoded with DTS Adjustment should be made with the remote control Adjusting the Items on the SETSET Menu SET Menu Speaker SET speaker mode settings1A Center SP center speaker mode LRGNone 1B Main SP main speaker mode1C Rear L/R SP rear speaker mode LargeSwfr 1D LFE/BASS OUT bass out mode1E Main Level main level mode Main4C Optical in for the Optical Input jacks Input Mode initial input mode4A CMPNT-V Input for Component Video jacks 4D Coaxial in for the Coaxial Input jackDTS SET DTS LFE level Dolby D. SET Dolby Digital setRange dynamic range OSD Shift OSD off-set position Center speaker imageAdjusting the Level of the Effect Speakers Press j / i to adjust the speaker output levelSetting the Sleep Timer Sleep TimerCanceling the Sleep Timer Selector Dial Remote Control FeaturesSelector Dial Controlling this unit Position of the Selector DialControlling the Components Connected to This Unit Controlling your TVTAPE/MD position tape deck, MD recorder or CD recorder Button Names and Functions in Each PositionCD position DVD/LD position DVD Menu positionVCR position CBL/SAT position TV positionIndicator flashes twice Setting the Manufacturer CodeTo use a second and third VCR To return to the factory-set codes in each position Make sure that the indicator flashes twiceTo return to the factory-set codes in all positions Enter the code numberCinema DSP Programs Sound Field ProgramHi-Fi DSP Programs For audio sources Nos toFor movie programs Nos to Theater SpectacleMovie Theater 1 Sound Field Program Parameters What is a sound field?Sound Field Program Parameter Editing Elements of a sound fieldProgram No. Program name group Changing Parameter SettingsResetting a Parameter to Factory-set Value Parameters Example of the Movie TheaterFunction Sound Field Parameter DescriptionsRoom Size for the presence sound field Surround sound field becomesDelay surround delay INIT.DLY surround initial delayRS.DELAY right surround delay CT.DELAY center delayLS.DELAY left surround delay Room Size surround room sizeTroubleshooting GeneralEffect speakers Volume level isNo sound from Rear speakersCannot be increased Volume levelOther settings on this Unit cannot be Changed When Tuner is Or the sound is Distorted EffectTuner Remote control Specifications Glossary PCM Linear PCM Video signalComponent video signal Sampling frequency and number of quantized bitsIndex Dolby D. SET SET MenuAdmiral KTV Satellite Tuner Cable TVVCR LD Player DVD PlayerCD Player MD Recorder CD RECORDER/CD-RWTape Deck V722820-1 DVD player Quick Reference Card AMP/TUN DSP/TUNDVD/LD DVD Menu

RX-V620RDS specifications

The Yamaha RX-V620RDS is a powerhouse in the world of home theater receivers, offering outstanding sound quality and a range of features that make it a popular choice for audio enthusiasts. Launched during the late 1990s, the RX-V620RDS has become known for its versatility and robust performance, catering to the needs of both casual listeners and serious audiophiles.

One of the standout features of the RX-V620RDS is its multi-channel processing capability. Supporting 5.1 channels, this receiver allows users to enjoy surround sound experiences, making it ideal for movie nights and gaming sessions. The onboard Dolby Digital and DTS decoders ensure that audiences receive enveloping audio that enhances their overall experience. Moreover, the unit provides an impressive power output, delivering 90 watts per channel into 8 ohms, which means it can drive demanding speakers effortlessly.

In terms of connectivity, the Yamaha RX-V620RDS does not disappoint. It is equipped with multiple audio and video inputs, including composite and S-video inputs, along with a dedicated phono input for vinyl enthusiasts. For video sources, the receiver includes a variety of outputs, accommodating different types of displays, from standard CRT televisions to modern flat screens.

Another significant feature of the RX-V620RDS is the inclusion of the Radio Data System (RDS) tuner. This technology allows the receiver to display information such as station names and song titles, enhancing the radio listening experience. Alongside this, the receiver supports FM and AM bands, providing a wide spectrum of entertainment options.

The RX-V620RDS also showcases Yamaha's commitment to build quality and user experience. The intuitive on-screen display simplifies navigation through settings and configurations, ensuring that even those less familiar with tech can easily set up their systems. Additionally, the remote control is user-friendly, allowing effortless operation from anywhere in the room.

Furthermore, the RX-V620RDS integrates Yamaha's patented YPAO (Yamaha Parametric Room Acoustic Optimizer) technology, which automatically measures the room acoustics and adjusts the audio settings for optimum sound quality. This feature is particularly valuable in home theater setups, where room characteristics can greatly influence audio performance.

In conclusion, the Yamaha RX-V620RDS remains a noteworthy receiver that combines advanced features, solid performance, and user-friendly design. With its multi-channel processing, extensive connectivity options, and innovative technologies, it has rightfully earned its place as a reliable choice for anyone looking to elevate their home audio experience. Whether you are a music lover or a home theater aficionado, the RX-V620RDS is equipped to deliver impressive sound for years to come.
Top Page Image Contents