Yamaha RX-V620RDS owner manual Adjusting the Level of the Effect Speakers

Page 48

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

You can adjust the output level of each effect speaker (center, left and right rear and subwoofer) while listening to a music source.

Adjustment should be made with the remote control.

3 Press j / i to adjust the speaker output level.

•The control range for the center or left and right rear speakers is from +10 dB to –10 dB.

•The control range for the subwoofer is from 0 dB to –20 dB.

1

A/B/C/D/E

A/B/C/D/E3

2

Notes

• If the speaker output mode is set to NONE, the output level of

that speaker cannot be adjusted.

• When you adjust the output level with LEVEL, the settings you

made with the test tone will be changed.

• To adjust speakers other than the subwoofer, the adjusting

procedure using the test tone on page 22 is recommended.

1 Set the selector dial to the

AMP/TUN (or DSP/TUN) position.

2 Press LEVEL repeatedly to select the speaker(s) you want to adjust.

Each time you press LEVEL, the selected speaker changes and appears on the front panel display and on the video monitor as follows: center, right rear, left rear and subwoofer.

 

 

C E N T E R

Center speaker output level

 

 

 

 

Right rear speaker output

 

 

 

 

 

 

R S U R .

 

 

level

 

 

 

 

 

 

 

 

Left rear speaker output

 

 

L S U R .

 

 

level

 

 

 

 

 

 

 

 

Subwoofer output level

 

 

S W F R

 

 

y

•Once you press LEVEL, you can also select the speaker(s) to be adjusted by pressing d. (Pressing u changes the selection in the reverse order.)

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in the standby

mode, the power cord is disconnected from the AC

outlet, or the power supply is temporarily cut due to

power failure. However, if the power is cut for more

than one week, the output level of the effect speakers

you adjusted will return to the factory settings. If so,

adjust the output level again.

46

Page 47 Page 49
Image 48
Page 47 Page 49
Contents RX-V620RDS For U.K. customers Special Instructions for U.K. ModelContents Features Multi-Mode Digital Sound Field ProcessingChecking the Package Contents Getting StartedControl Front Panel PRESET/TUNING Edit Tuning Mode AUTO/MAN’L MonoBass TrebleRemote Control When selecting an input source Description of the Numeric ButtonsEffect Using the Remote Control When selecting a preset station numberHandling the remote control See Setting the Manufacturer Code for setting the codeFront Panel Display Rear Panel AC OutletsSpeaker Setup Speaker PlacementSpeakers to Be Used Before Connecting Components ConnectionsCD player Turntable MD recorder Or CD recorderConnecting Video Components Video monitor with a 21-pin connectorAbout the video jacks Video AUX jacks on the front panelWhen using an LD player Monitor SCART-plugDVD player No connectionConnecting the Speakers Subwoofer jack Main speakers aRight Left Europe model Right Left Subwoofer Center speakerConnecting an External Decoder Main jacksRear Surround jacks Center jacksImpedance Selector Switch Connecting the Power Supply CordsEurope model To AC outletSelecting the OSD Mode ON-SCREEN Display OSDOSD Modes Speaker Mode Settings Setting indicated in boldSummary of Speaker SET Items 1A through 1E Adjusting the Speaker Output Levels Adjust the volume so you can hear the test toneBefore You Begin Video monitor Press Speakers a or BPress Level repeatedly to select the speaker to be adjusted When the adjustment is complete, press TestSelect this To reproduce the signal from This component Basic PlaybackWhen you have finished using this unit To mute the soundInput Modes and Indications BGV background video functionEnglish On the remote control On the front panel Press DSP ProgramPress DSP Turn the multi jog knob to select the programNormal Stereo Reproduction Virtual Cinema DSP and Silent CinemaVirtual Cinema DSP Silent CinemaTuning Connecting the AntennasConnecting the indoor FM antenna Connecting the AM loop antennaAutomatic or Manual Tuning Presetting Stations Automatically presetting stations for RDS stationsTuning in to a Preset Station Manually presetting stationsOn the remote control Exchanging Preset Stations Changing the RDS Mode Receiving RDS StationsDescription of RDS Data To cancel this function Program types in the PTY modePress PTY Seek Mode to set the unit PTY Seek mode PTY Seek FunctionEON Function FlashesSpecial considerations when recording DTS software Basic RecordingFor DVDs and CDs encoded with DTS Adjusting the Items on the SET Adjustment should be made with the remote controlSET Menu Speaker SET speaker mode settings 1A Center SP center speaker modeSET Menu LRG1B Main SP main speaker mode 1C Rear L/R SP rear speaker modeNone Large1D LFE/BASS OUT bass out mode 1E Main Level main level modeSwfr MainInput Mode initial input mode 4A CMPNT-V Input for Component Video jacks4C Optical in for the Optical Input jacks 4D Coaxial in for the Coaxial Input jackDolby D. SET Dolby Digital set DTS SET DTS LFE levelRange dynamic range OSD Shift OSD off-set position Center speaker imageAdjusting the Level of the Effect Speakers Press j / i to adjust the speaker output levelSleep Timer Setting the Sleep TimerCanceling the Sleep Timer Remote Control Features Selector DialSelector Dial Position of the Selector Dial Controlling the Components Connected to This UnitControlling this unit Controlling your TVButton Names and Functions in Each Position TAPE/MD position tape deck, MD recorder or CD recorderCD position DVD/LD position DVD Menu positionVCR position CBL/SAT position TV positionSetting the Manufacturer Code Indicator flashes twiceTo use a second and third VCR Make sure that the indicator flashes twice To return to the factory-set codes in all positionsTo return to the factory-set codes in each position Enter the code numberSound Field Program Hi-Fi DSP ProgramsCinema DSP Programs For audio sources Nos toFor movie programs Nos to Theater SpectacleMovie Theater 1 What is a sound field? Sound Field Program Parameter EditingSound Field Program Parameters Elements of a sound fieldChanging Parameter Settings Resetting a Parameter to Factory-set ValueProgram No. Program name group Parameters Example of the Movie TheaterSound Field Parameter Descriptions Room Size for the presence sound fieldFunction Surround sound field becomesDelay surround delay INIT.DLY surround initial delayCT.DELAY center delay LS.DELAY left surround delayRS.DELAY right surround delay Room Size surround room sizeTroubleshooting GeneralVolume level is No sound fromEffect speakers Rear speakersVolume level Other settings on this Unit cannot be Changed When Tuner isCannot be increased Or the sound is Distorted EffectTuner Remote control Specifications Glossary Video signal Component video signalPCM Linear PCM Sampling frequency and number of quantized bitsIndex Dolby D. SET SET MenuAdmiral KTV Cable TV Satellite TunerVCR DVD Player LD PlayerCD Player CD RECORDER/CD-RW MD RecorderTape Deck V722820-1 DVD player Quick Reference Card AMP/TUN DSP/TUNDVD/LD DVD Menu

RX-V620RDS specifications

The Yamaha RX-V620RDS is a powerhouse in the world of home theater receivers, offering outstanding sound quality and a range of features that make it a popular choice for audio enthusiasts. Launched during the late 1990s, the RX-V620RDS has become known for its versatility and robust performance, catering to the needs of both casual listeners and serious audiophiles.

One of the standout features of the RX-V620RDS is its multi-channel processing capability. Supporting 5.1 channels, this receiver allows users to enjoy surround sound experiences, making it ideal for movie nights and gaming sessions. The onboard Dolby Digital and DTS decoders ensure that audiences receive enveloping audio that enhances their overall experience. Moreover, the unit provides an impressive power output, delivering 90 watts per channel into 8 ohms, which means it can drive demanding speakers effortlessly.

In terms of connectivity, the Yamaha RX-V620RDS does not disappoint. It is equipped with multiple audio and video inputs, including composite and S-video inputs, along with a dedicated phono input for vinyl enthusiasts. For video sources, the receiver includes a variety of outputs, accommodating different types of displays, from standard CRT televisions to modern flat screens.

Another significant feature of the RX-V620RDS is the inclusion of the Radio Data System (RDS) tuner. This technology allows the receiver to display information such as station names and song titles, enhancing the radio listening experience. Alongside this, the receiver supports FM and AM bands, providing a wide spectrum of entertainment options.

The RX-V620RDS also showcases Yamaha's commitment to build quality and user experience. The intuitive on-screen display simplifies navigation through settings and configurations, ensuring that even those less familiar with tech can easily set up their systems. Additionally, the remote control is user-friendly, allowing effortless operation from anywhere in the room.

Furthermore, the RX-V620RDS integrates Yamaha's patented YPAO (Yamaha Parametric Room Acoustic Optimizer) technology, which automatically measures the room acoustics and adjusts the audio settings for optimum sound quality. This feature is particularly valuable in home theater setups, where room characteristics can greatly influence audio performance.

In conclusion, the Yamaha RX-V620RDS remains a noteworthy receiver that combines advanced features, solid performance, and user-friendly design. With its multi-channel processing, extensive connectivity options, and innovative technologies, it has rightfully earned its place as a reliable choice for anyone looking to elevate their home audio experience. Whether you are a music lover or a home theater aficionado, the RX-V620RDS is equipped to deliver impressive sound for years to come.
Top Page Image Contents