Concord Camera Eye-Q Easy Digital Camera manual Taking a picture with flash, Setting the Flash

Page 12

Taking a picture with flash

The Concord Eye-Q Easy has two flash modes, Automatic Flash and Flash Off. Flash Off is the default mode. When the red Busy LED on the back of the camera is illuminated there is not sufficient light to yield a good quality image without using the flash. To set the flash, please refer to the Setting the Flash section below.

Setting the Flash

1.Turn the camera on by pressing the Power/Select button.

2.Press the Flash On/Off button.

3.The auto flash icon will blink. When the icon stops blinking you are ready to take a picture.

Important notes about auto flash

Optimal image results are obtained using the flash when the distance between the camera and the scene is 1m (3.2 ft.) to 3m (9.8 ft.).

11

Image 12

Contents Page Table of Contents Important Information For customers in CanadaTest Shots Liquid CrystalProduct overview BackImportant battery information Eye-Q Easy package contents Getting startedMinimum system requirement Low battery warning Learning the LCD displayImportant battery information Loading the batteriesBattery level Turning the camera on/offSetting the Photo Quality and Changing Modes Taking PicturesSetting the Flash Taking a picture with flashImportant notes about auto flash Using the Self-timer Taking a movie clipDeleting pictures and video To delete all images and videoTo delete the last image captured Installing the drivers and software Installing the Camera driver Concord Eye-Q EasyWorking with your pictures Uploading your pictures to your PCUsing the camera as a web cam Uploading your video clips to your PCUninstalling the software on a Windows PC Uninstalling the driver on a Windows PCCleaning and maintenance Places to AvoidCleaning your Camera When traveling overseasStoring the camera Troubleshooting Symptom Problem SolutionSymptom Problem Solution Getting Help Warranty Information Limited WarrantyTechnical Support Hot Line