Concord Camera 3103 manual Problem Cause Action

		Reference
Problem	Cause	Action
	- The mode dial is set to	- Turn the mode dial to Auto
Image does not record when		mode or Manual mode.
the shutter button is pressed.	Playback mode.	- Wait until the flash finishes
	- Flash is charging.	charging.
	- Memory is full.	- Delete images you no longer
		need.
		- Hold the camera steady when
		shooting.
		- Be sure that there is at least
	- The camera was moving	80cm between the camera
		lens and the subject.
	when you took images.
Images are blurry or unfocused.		- Press the shutter button halfway
	- The subject was out of
	focus range.	and align the auto focus mark on
		the subject. When the focus is
		locked, the auto focus mark turns
		green. Further depress the
		shutter button to take the picture.
	Camera powers off before	If the low-battery indicator
Recorded images are not		appears on the camera LCD
	the save operation has
saved in memory		screen, replace batteries with a
	completed.
		full set of new ones.
	A memory card with non-DCF	This camera can not display
Images are not displayed.	images recorded with another
	camera is loaded in the	non-DCF images.
	camera.
The flash doesn't fire.	The flash mode is set to Off.	Set the flash to any other mode
		except Off.
	- There is a problem with the	- Please use the attached video
		cable to connect the camera
Image not showing on TV.	camera-TV connection.	to the TV correctly.
	- Incorrect video system	- Set the video system to the
	setting.	appropriate setting, NTSC or
		PAL for your TV
Cannot transfer images after	- USB driver is not installed.	- Install the USB driver before
		you connect the camera to a
connecting to a computer with
	- Camera is turned off.	PC.
USB cable.
		- Turn on the camera.

57