Concord Camera 3103 manual Taking a picture, Taking a Picture in Auto Mode

Page 24

Taking Pictures

Taking a picture

There are two Modes you can choose from to take a picture. In the Auto Mode, just press the shutter button and let the camera judge the environmental conditions for you. In the Manual Mode, you can manually adjust the exposure and set the white balance based on different environmental conditions.

If you don’t insert the SD card into the camera, you can take the pictures and store them in the camera's internal memory. If you insert the SD card into the camera, pictures will be saved to the SD card only. You can't access the SD card and the internal memory at the same time.

Taking a Picture in Auto Mode

1.Turn the Mode dial to Auto ( ).

2.Press the POWER button ( ) to power on the camera.

3.Press the Shutter button halfway and align the auto focus mark on the subject you want to take. When the focus is locked, the auto focus mark turns green.

4.Take a picture by pressing the shutter button further. When the camera beeps, the image has been captured and will be recorded on the card or in the internal memory.

* The camera will not emit a beeping sound if this function is disabled.

5.During recording to the memory card, the LED indicator will flash in Green. Once the LED indicator stops flashing, the recording has finished.

20

Image 24
Contents Page Index Taking Pictures Setting Your Camera for Printing Contents of Package System RequirementsGeneral Precautions FCC Compliance and AdvisoryCamera Nomenclature FrontBack Accessory Set-up Attaching the Wrist StrapUsing the Soft Case Battery Installation Preparing to Take PicturesLow Battery Indicator If using the AC Adaptor Turning the Camera on and OFFDate and Time Set-Up YY/MM/DD MM/DD/YY DD/MM/YY Beep Sound Set-Up Power Save Settings Quick View Setting TV Out Signal Set-Up Language Set-Up Page Using a Memory Card Inserting a SD memory cardRemoving the SD memory card Camera Working Mode Auto Photo ModeManual Photo Mode Playback ModePreviewing a Picture before it is taken Turn off the previewing LCD screenTaking a Picture in Auto Mode Taking a pictureTaking a Picture in Manual Mode Adjusting the Exposure StepsSetting the White Balance · Auto · Daylight · Shade · TungstenChanging the Picture Resolution and Quality Compression Resolution SettingQuality Setting Setting the Flash Press Button to select the flash modeUsing Digital Zoom Continuous Shutter Mode To cancel the Continuous Mode functionSetting the Self-Timer OFFAdjusting the exposure and white balance before recording Recording Video imagesFunctions Available in Each Shooting Mode Power Save Quick View TV OUT LanguageViewing Pictures Viewing Thumbnail PicturesZooming the Displayed Image View different areas of the magnified imageDeleting Pictures Deleting a Single ImageDeleting All Unprotected Images Page Protecting Pictures against Deletion Protect or unprotect a single imageProtect or unprotect all images Running a Slide Show Copying Flash Memory Images to a Memory Card Formatting the Memory Card or Internal Memory Folders and Files FoldersFiles Dpof Print Settings Print Order SettingResetting the Print Order Setting Dpof OptionsSetting Your Camera for Printing Print Image MatchingInstalling the Driver & Software Installing the DriverInstalling the Software Windows Users Page Page Page Using MGI PhotoSuite 4 SE Viewing Images on a TV Set Downloading Images to a ComputerDownloading Images Directly from a SD card Page Transferring Images to a Mac About the memory storage you are using in this camera Internal MemoryLED Indicator Reference Chart ReferenceTroubleshooting LEDProblem Cause Action Specifications Specifications are subject to change without prior notice Technical Support Hot Line