White Balance WB, Iris, Agc, Mirror Mirr

▪WHITE BALANCE (WB)

Choose “WB (WHITE BALANCE)” in the Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and choose one among AUTO, OUT DOOR, INDOOR and LAMP by pressing “NEAR”/”FAR” button.

▪IRIS

Choose “IRIS” in the Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and choose one among AUTO, FIX, NIGHT and MOVE by pressing “NEAR”/”FAR” button.

▪AGC

Choose “AGC” in the Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and select “ON” or “OFF” by pressing “NEAR”/”FAR” button.

▪MIRROR (MIRR)

Choose “MIRROR” in the Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and select “ON” or “OFF” by pressing “NEAR”/”FAR” button.

You can view the mirror image when the “ON” is selected and the normal image when the “OFF” is selected.

▪BAUD RATE

Choose “BAUD” in the Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and choose 2400 BPS (Bit Per Second) among 2400, 4800 and 9600 by pressing “NEAR”/”FAR” button.

▪DEFAULT (DEFLT)

Choose “DEFAULT (DEFLT)” in the Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and press the Menu button twice to set the factory default values.

Tips for Quick Setup on the zoom camera:

-You can operate the zoom camera without changing any settings.

-The factory default ID is “000”, but choose a number among “0” to “255” as an ID if necessary.

-Do not change the Baud Rate which is 2400.

4.2On the DVR system

▪Click on the SETUP icon on the Menu Bar as shown below.

[Fig.4-3 Menu Bar]

▪Click the “CAMERA” in the Setup Menu and then the Camera Menu will be displayed as shown in Fig.4-4.