Concord Camera 5345z manual TV Format, To use the camera with your TV

Page 19

OPERATION (CONTINUED)

TV FORMAT

Select NTSC or PAL video format to correspond with your TV. To set the TV format, follow the instructions below:

1

1

When the power is on, press the MODE button three times to enter the TV Format Feature Setting menu; PALor NTSCwill appear in the display.

2

12

Press the SELECT/Flash button to cycle between the modes to select the desired mode. When the desired mode (“PALor NTSC”) appears in the display, press the Shutter button

to confirm the setting.

3 2 1

To use the camera with your TV:

Connect the supplied video cable to the VIDEO OUT jack on your camera and the other end to your TV. Make sure the TVs video option is set to this jack and turn the camera on. Your images will appear on the screen. Press the SELECT (Next Image) or MODE (Previous) button to cycle through the pictures. Press and hold the SELECT (Slide Show) button for at least one second to activate the slide show. Press any button to stop the slide show.

WARNING: The TV out function draws a larger amount of current from the batteries during its operation. Please be aware that usage of this feature may cause your batteries to drain faster than at normal operation. It is recommended that you be prepared in andvance and have spare batteries available when planning to perform a slide show of your images on a TV set.

18

Image 19
Contents Megapixel Congratulations Table of Contents FCC Information Important InformationUser Information Precautions TOP Front Location of ControlsRight Rear Display BottomGetting Started Software InstallationMac Users ArcSoft PhotoPrinter Saving Your Pictures to Your Computer Computer Connection for Picture UploadImportant notes about the batteries Loading the Batteries Turning the Camera on and OFF Setting the Flash Taking Pictures Image Setting Feature Setting MenusOperation Using the SELF-TIMER To use the camera with your TV TV FormatDeleting the Pictures from the Memory Taking a Movie Clip Cause Solution Power Troubleshooting GuideSymptom Possible Cause Solution StartSettingsControl For Software Technical SUPPORT, Please Contact Care and MaintenanceCleaning the Lens and Viewfinder USA and Canada EuropeTechnical Support Hot Line