Loading the Batteries

GETTING STARTED

Before taking pictures, insert two (2) “AA” batteries into your camera's battery compartment, as follows:

1.Open the battery compartment by pushing the tab in as in Figure 1.

2.Insert two (2) “AA” batteries into the battery compartment, observing the polarity marks (+ / -) as indicated in Figure 2.

3.Close the battery compartment until it clicks.

NOTE: Batteries will need replacing when the Battery indicator blinks in the display.

+	–
	–	+

FIGURE 1

FIGURE 2

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)