FCC Part 15/ICES-003 Compliance

24	FlexCam iCam Digital — Appendix

the product, or such other matters as it elects to honor this warranty as above provided.This warranty does not cover damage to the product during shipping and the Manufacturer assumes no responsibility for such damage. All shipping costs shall be paid by the customer.

This warranty extends only to the original end user and is not assignable or transferable.This warranty is governed by the laws of the State of Utah, without regard to the conflicts of interests provisions thereof.

ClearOne Communications Inc.

1825 Research Way

Salt Lake City, Utah 84119

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules and Industry Canada ICES-003.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

Operation is subject to the following two conditions: (1) This device may not cause interference, and

(2)This device must accept any interference including interference that may cause undesired opera- tion of the device.

Changes or modifications not expressly approved by ClearOne Communications could void the user's authority to operate the equipment.

European Compliance

This equipment has been approved in accordance with Council Directive 1999/5/EC "Radio Equipment and Telecommunications Equipment". Compliance of the equipment with the Directive is attested by the application of the CE mark on the equipment.

EC Declaration of Conformity
Application of Council Directive(s):		1999/5/EC Radio equipment and Telecommunications
Terminal Equipment (R&TTE) Directive
Manufacturer's Name:	ClearOne Communications
Manufacturer's Address:	1825 West Research Way Salt Lake City, Utah 84119 U.S.A.
Model No.:	FlexCam iCam 910-171-101-PAL and
	FlexCam iCam Digital 910-171-102-PAL

FlexCam iCam Digital — Appendix

Standard(s) to which Conformity is declared:

89/336/EEC "Electromagnetic Compatibility (EMC) Directive":

EN 55022: 1994 (Emissions)	Specification for limits and methods of measurement of
	radio interference characteristics of information
	technology equipment
EN 61000-3-2:1995/A1/A2:1998	Part 3: Limits - Section 2: Limits for harmonic current
	emissions.
EN 61000-3-3:1995 Section 3:	Limitation of voltage fluctuations and flicker in low
	voltage supply systems for equipment with rated current
	up to and including 16 A
EN 55024: 1998 (Immunity)	Information technology equipment -
	Immunity characteristics - Limits and
	methods of measurement
EN 61000-4-2: 1995/A1:1998	Electrostatic Discharge
EN 61000-4-3: 1996/A1:1998	Radiated RF Immunity
EN 61000-4-4: 1995	Electrical Fast Transients
EN 61000-4-5: 1995	Lighting Surge
EN 61000-4-6: 1996	Conducted RF Immunity
EN 61000-4-11: 1994	Voltage Dips and Voltage Interruptions
73/23/EEC "Low Voltage Directive (LVD)":
IEC 60950-1: 2003	Safety of Information Technology
	Equipment, Including Electrical Business
	Equipment

We, the undersigned, hereby declare that the equipment specified above conforms to the above Directives and Standards.

Manufacturer

Legal Representative in Europe

Signature		Signature
Roger J. Midgley		Martin Offwood

Full Name		Full Name
Project Manager		Managing Director EMEA North
Position		Position

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

FCC Part 15/ICES-003 Compliance

European Compliance

EC Declaration of Conformity

EN 61000-3-3:1995 Section 3: