Atlona AT-HD-V42M user manual Rear Panel

Page 5

2. Rear Panel

1.DC POWER INLET. Power Input: 12VDC

2.IR EXTENDER CONTROL. Support one of IR Extender, extend distance maximum 300Meters

3.RS 232 CONNECTION. DB-9pin Female connector for serial RS-232 control.

4.VIDEO INPUTS: HDMI Inputs 1-4. HDMI Female connector. (Unit can be used with HDCP compliant DVI digital video signals with appropriate)

5.VIDEO OUTPUTS: HDMI Outputs 1-2. HDMI Female connector. (Unit can be used with HDCP compliant DVI digital video signals with appropriate)

REMOTE CONTROL

Ensure the mains voltage supply matches the label on the supplied plug-Pack (+/- 10%)

Ensure that the power switch is OFF

Connect all audio video sources and destination equipment Power up all HD Source and Displays

For each desired output select the appropriate input by using the front panel select buttons, IR remote control, or the RS232 serial communica- tions port.

When powering up the AT-HD-V44M will return to its last used setting before Powered down.

1,2. SWITCH POWER ON or OFF

3. INPUT 1 SOURCES SELECTION

(Select input 1, 2, 3 & 4 sources with selection button)

4. INPUT 2 SOURCES SELECTION

(Select input 1, 2, 3 & 4 sources with selection button)

5. INPUT 3 SOURCES SELECTION

(Select input 1, 2, 3 & 4 sources with selection button)

6. INPUT 4 SOURCES SELECTION

(Select input 1, 2, 3 & 4 sources with selection button)

www.atlona.com toll free: 1-877-536-3976

 

5

For International: 1-408-962-0515

 

Image 5
Contents Atlona Table of Contents Introduction Front Panel Rear Panel IR Extender Connection IR Extender Package RS-232 Serial Interface CommandsRS-232 SBI04O02-Send SBUD04O2-RcvdFront Panel Lock Power Off ModeUnit Reset Connection and Installation Precautions SafeguardsLimited Warranty Atlona Product Registration