Supplemental Operating Notes
•The LCD showing “ENTER SUSPEND” means the system is going to suspend activity (sleep mode to conserve battery power).
•After setting K1 to ON, the system will begin working after a two minute delay. If there is no activity sensed in three minutes, the system will go to SUSPEND. When the PIR senses activity, the camera will be activated immediately.
•The LCD showing “RESUME” means the system is active.
•Changing batteries within 20 seconds will avoid the need to reset the date and time.
Trail Scout 2008 Models 119835+124 24 | 3/4/08 12:05:30 AM |