Bushnell 119937, 119835, 119907 manual Other Setup Notes, SD Card Slot

Page 15

Other Setup Notes

1. SD CARD SLOT

The unit has a standard SD Card slot. You must push the SD Card in with the SD Card label facing the Bushnell logo into the SD card slot. Pushing it again will release the SD card, and then you can remove the SD card from the SD card slot. Insertion or removal of SD card is only recommended when the unit is in the “OFF” position, as data can be lost or files corrupted if a card is removed while storage is in progress with the unit powered on.

2. PIR SENSOR

The sensor that triggers the trail camera is Passive InfraRed, or PIR. Infrared energy is essentially heat energy. The PIR detector operates by sensing a change in the infrared level in its detection zone. This zone is a cone in the center 10 degrees of the camera’s field of view. The camera establishes an average long-term infrared level. When this level increased suddenly the PIR detector signals the camera to record a picture and/or an event. Because of this effect, the PIR detector will be more sensitive at night, when the average temperature is lower.

In the Setup mode, you can use PIR sensor to determine the detection zone .When the PIR is sensed, the PIR Sense Indicator will light. The camera’s field of view is a 45 degree cone, centered on the PIR detection zone.

15

Trail Scout 2008 Models 119835+115 15

3/4/08 12:05:28 AM

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Lit. # 98-1110/02-08 ModelTrail Scout 2008 Models 119835+12 08 120525 AM Bushnell Digital Trail Scout Features All Models Digital Trail Scout Models Digital Trail Scout Specifications Parts Guide Switch #/Function Switch Position/SettingSetup Guide K1 Mode Switch OFF / SETUP/ onPower OFF Set K1 to Off, the Trail Scout will be OFF Setup Guide SET Password Password Yes New Pswd NoneSound Off Call 01 Hrs Photo Multiple K3 Flash Mode Switch LED / Standard LED Mode Infrared LED lamp arraySTD Standard Mode Xenon flash tube Trail Scout 2008 Models 119835+113 08 120528 AM Glossary SD Card Slot Other Setup NotesAuto DAY/NIGHT IR Filter Switch Models 119937/119907 Only Other Setup NotesOther Setup Notes Trail Scout Ratcheting Bracket Installation Tips Finally, insert the padlock and lock when setup is completed Using The Digital Trail ScoutPower on and Setup Switch Summary Using the Trail ScoutGame Call Descriptions Model 119907/119937 Only Models 119907 and 119937 only Compatible with models 119835, 119907 Supplemental Operating Notes Trail Scout 2008 Models 119835+125 08 120530 AM TWO-YEAR Limited Warranty Trail Scout 2008 Models 119835+127 08 120531 AM Bushnell Outdoor Products
Top Page Image Contents