(Figure 11)

9VAC Adapter

AC Plug

Telephone

Modular Jack

AC Outlet

Line Cord

9VAC Adapter Jack

(Figure 9)

HANDSET BATTERY INSTALLATION

CAUTION:

Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage.

1.Remove the battery compartment cover of the handset. Connect the rechargeable Ni-Cd battery as shown in Figure 10.

Handset

Insert the End of the

Battery

Battery Pack Wire

Compartment

 

RED Wire

BLACK Wire

 

(Figure 10)

2.Insert the Ni-Cd battery into the battery compartment of the handset.

3.Slide the battery compartment cover firmly in its closed position.

INITIAL SETUP

Before you can use your cordless telephone, the handset must be charged for at least 20 hours. See charging instruction on MAXIMIZING BATTERY LIFE section of this manual.

SETTING THE DAY AND TIME OF THE BASE UNIT

NOTE: The time set is used for time stamping the recorded message(s).

1.After 20 hours, lift the handset from the base unit.

2.Press the REMOTE button on the handset. The unit will prompt "You have no new message. For help, press

9." followed by a long beep.

3.Press 2. The unit will prompt "Time is off. Enter new day."

4.After hearing a long beep, enter the new day (Sunday = 1, Monday = 2, Tuesday = 3, etc.). The unit will then prompt "Enter new time."

5.After hearing a long beep, enter the new hour (01-12).

6.After two beeps, enter the new minute (00-59).

12

 

Page 13

7/5/01, 4:07 PM

 

 

 

MPH7895/04281A(English).put

Adobe PageMaker 6.5C/PPC

 

 

 

 

 

 

 

Page 13
Image 13
Memorex MPH7895 manual Handset Battery Installation, Initial Setup, Setting the DAY and Time of the Base Unit