Memorex MPH7895 manual Remote Operation, Using the Handset, Calling the Unit from a Tone Phone

(Figure 28)

NOTE: If memory is full, the unit will announce " Memory full." and Two-Way recording is not possible. You can erase any or all the messages remotely after listening to them. Refer to the REMOTE OPERATION section for more details.

Recording two-way conversations may be subjected to Local State and Federal laws and regulations

VOX (VOICE ACTIVATED) DETECTION

During ICM recording, the unit uses VOX (voice activation) to conserve message storage space. The conditions for the unit terminating a recording are:

•Continuous silence for seven seconds.

•Seven seconds after the caller hangs up.

REMOTE OPERATION

Allows you to access most of the unit functions away from the base unit using only the handset or any touch tone phone when you call the unit. You can play, review, repeat, skip, erase, and stop messages in the message boxes, record a Memo or an OGM, set the Answer Mode ON or OFF, change your password, set the time and day, activate the call screening function and the Voice Menu.

USING THE REMOTE OPERATION FUNCTION

There are Two-Ways of using Remote Operation:

1.Handset (Remote Unit), or

2.Calling the unit from a Tone Dialing Phone

A. USING THE HANDSET

1. Press the REMOTE button to activate the remote function.

2.The base unit Digital LED Display shows “rc” and handset LCD Display shows “REMOTE” to indicate the remote operation is actiuated.

B. CALLING THE UNIT FROM A TONE PHONE

NOTE :The factory preset password for remote operation is "#58".

1.Call the unit from a tone dialing phone.

2.While the OGM is playing or during ICM recording, enter # plus your 2 digits password.

3.After a successful password entry, the Remote Operation function is on.

Once you have activated the Remote Operation function either by handset or through a tone dialing phone to call the unit:

1.The unit will announce the total number of new message(s) in Message (MSG) box.

2.The unit will prompt "For help, press 9."

REMOTE COMMANDS

A. VOICE HELP MENU

Press 9 for Voice Help Menu. All remote commands can be entered during playback of the menu. The following table shows the Voice Help Menu:

Key	Function
1	Change Password
2	Change Time and Day
3	Playback Memo Message
4	Record Memo Message
5	Record OGM Message
6	Set Answer Mode to ON

7Playback Message (ICM or Two-Way Recording)

8	Playback OGM
9	Voice Help Menu
*	Stop Function
	20

	Page 21	7/5/01, 4:08 PM
MPH7895/04281A(English).put			Adobe PageMaker 6.5C/PPC