1.Press SCAN/PRG button.
2. | Press 4 button, or press(+) button four times. The Callback | 10 | |||
| Number is displayed. |
|
| CALLBACK NUMBER | |
3. | Press or | button to change the Callback Number. The |
| ||
| |||||
| Callback number scrolls as 10 | 07 | 10. |
| |
4.Press SCAN / PRG button to save and exit.
F. HOW TO SET RINGER ON / OFF
1. In standby mode, press SCAN / PRG button.
2.Press 5 button, or press
3. | Press or button to change mode. | RINGER OFF |
4. | Press SCAN / PRG button to save and exit. |
G.HOW TO SET TIME
NOTE: The time set is for the LCD Display time. If CALLER ID signal comes in, the time will adjust automatically.
1. In standby mode, press SCAN / PRG button.
2. Press 6 button, or press
3.Enter 2 digits hour. The position to edit is blinking.
Use button to move the cursor to the left.
4.Enter 2 digits minute.
5.Press 1 for AM and 2 for PM.
6.Enter 2 digits month.
7.Enter 2 digits day.
8.Press SCAN / PRG button to save and exit.
H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY
1.In standby mode, press SCAN / PRG button.
2.Press 7 button, or press
3. | Press or button to change the contrast. |
| ||
02 | ||||
| The contrast scrolls as 01 | 02 03 (Three steps). | ||
| CONTRAST | |||
4. | Press SCAN / PRG button to save and exit. | |||
| ||||
NEW CALL / MESSAGE INDICATOR
On the base unit, NEW CALL LED indicator will flash every 1second when new call comes in. NEW CALL LED indicator will flash every 2 second when voice mail message comes in. On the handset, NEW CALL LED indicator will flash every 2 seconds.
TALKING TIME AND CHANNEL DISPLAY
In talk mode, the LCD Display shows the talking time. The LCD Display as shown means 1 hour and 12 minutes and 10 seconds. The using channel is 32.
1:12 10 32
TALK
CALL WAITING ID OPERATION
Call Waiting ID lets you know who is on call waiting while you are still using the telephone. Before, only a tone alerts you if you have a call waiting. Now, the unit can also show the Caller Identification on Call Waiting (CIDCW) information using the LCD Display.
NOTE: During conversation and the Call Waiting signal comes in, you will hear the data signal. Before you use these features on your unit telephone, you must first subscribe to the services through your local telephone company.
When the Call Waiting signal is heard on the receiver, the LCD Display will show the name and number just like regular Caller ID. If you wish to speak to this person, press the FLASH button.
The Call Waiting ID Records are stored, reviewed, redialed and edited the same as regular Caller ID Records. Please refer to the CALLER ID OPERATION section for more details.
25
| Page 26 | 7/5/01, 4:08 PM |
|
|
|
MPH7895/04281A(English).put | Adobe PageMaker 6.5C/PPC |
| |||
|
|
|
|
|
|
