OUT OF RANGE

MSG WAIT ON

MSG

ALL:10 NEW:05

OUT OF RANGE

The handset has tried to call but failed or the handset is moved out of range from the base unit in talk mode.

MSG WAIT ON

This means that your voice mail box has a new message right now.

MESSAGE WAITING MARK

The MSG mark means that your voice mail box has a new message.

IMPROVING CORDLESS RECEPTION

Follow these guidelines to improve cordless sound quality:

Select an area to install the unit where it is closest to the center of your home or office. This will improve the operating range of the unit.

Keep the unit base unit away from electrical equipment. Radio Frequency Inter ference (RFI) is sometimes generated by these appliances, which can cause a degra dation in cordless reception.

Keep the handset batteries charged as much as possible. Weak handset batteries can limit the range of cordless operation.

MAXIMIZING BATTERY LIFE

Repeated use or recharge of Ni-Cd batteries without periodic full discharge results in re- duced useable charge time. When you notice the usable charge duration decreasing, fully discharge the Ni-Cd battery and recharge as described:

DISCHARGING

1.Unplug the telephone line cord from the unit.

2.Make sure that the adapter is connected.

3.Lift the handset out of the base cradle.

4.Press the TALK button of the handset and start discharging.

Once the LOW appears on the LCD Display, it means that the battery level is low. Let it fully discharge for 12 hour. Once the Ni-Cd battery is fully discharged, you may now charge the battery to its full capacity.

CHARGING

1.Make sure the adapter and telephone line cord is connected to the unit.

2.Place the handset on the base cradle. The CHG(Charge) LED indicator of the base unit will light steadily.

3.Leave the handset charging on the base for 20 hours continuously to get a maximum charge.

4.The unit is now ready for regular use. Discharge and charge the Ni-Cd battery again once you notice a decrease in the useable charge time.

MAINTENANCE

1.Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat.

2.Use a slightly damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish.

27

 

Page 28

7/5/01, 4:08 PM

 

 

 

MPH7895/04281A(English).put

Adobe PageMaker 6.5C/PPC

 

 

 

 

 

 

 

Page 28
Image 28
Memorex MPH7895 manual Improving Cordless Reception, Maximizing Battery Life, Maintenance