ATO 360i user manual Troubleshooting Tips, Viewing Release Notes, Problem Solution

Section 7. Maintenance and Troubleshooting

Viewing Release Notes

Release notes that tell about changes made in the new firmware are copied to the Notes section of your iPod.

To view the release notes:

1.Leave the iSee power off and turn the iPod on.

2.On the iPod, navigate to Extras Notes and view the iSee release notes.

Troubleshooting Tips

Problem	Solution
There’s a delay	This is normal. The iSee uses the
before starting a	iPod’s hard disk, and hard disks
video or exiting from	often have some delay in
a playing video.	responsiveness.
I turned on the iSee,	Turn the iPod off and remove it.
but never see the “Do	Turn the iSee off. Then reinsert the
not disconnect”	iPod into the iSee and turn the iSee
message on the iPod.	on.
No display on iSee	Make sure AC adapter or USB
	cable is securely attached to iSee.
	Make sure iPod is plugged securely
	into the iSee. The iSee requires an
	iPod in order to operate.
	Make sure you have not selected
	TV-Out. When TV-Out is enabled,
	the iSee screen is blank.
	If you have just switched to
	TV-Out, you can press
	Select (	) again to revert to
	the iSee display.
	Or turn the iSee off, then on
	again to restore the display to
	the iSee screen.

-60- iSee 360i User’s Manual