ATN 3 manual Mounting the ATN NVM-14 to a helmet, Attaching ATN NVM-14 to Hlmet Mount

B. Mounting the ATN NVM-14 to a helmet

Helmet mount for attachment of ATN NVM-14 to a standard PAS- GT helmet. Helmet mount fits securely onto helmet via a rugged strapping device and grooved hooks. With helmet mount, NVM- 14 can be positioned directly in front of user’s eyes or flipped.

1.Install the mount onto helmet as shown on the picture.

2.Tighten and fixate the straps (A)

3.Attach goggles to the rail.

4.Loosen the screw (C). Push the button (B) and insert the bracket of the NVM-14 into the rail (D) of the helmetset.

5.Place the helmet with NVM-14 onto a head.

6.Loosen the screw (C) and move the unit along the rail for eye relief adjustment.

7.The NVM-14 helmetmount has a flip-up mechanism. Push the button (E) on the side of mount and lift the unit up until the unit fixates in the top position. The device in top position will turned off automatically.

8.Push the same button to lower NVG-7 to viewing position. Turn the device on for continuation of the operation.

9.The NVM-14 can be placed onto the right or left eye. In order to reajust the monocular for another eye, take the unit off the headmount adapter, turn the unit other side (for 180º) and mount it on the headmount adapter through the Picatinny rail on this side. Push the button (E) and move the device along the slide-rail (F) for comfortable position.

A

B E

C

DA

F

Figure 3-2

Attaching ATN NVM-14 to Hlmet Mount