ATN 3 manual Mounting Camera/Camcorder to the ATN NVM-14, Mounting IR-450 to the ATN NVM-14

G. Mounting Camera/Camcorder to the ATN NVM-14

1.Screw Camera Adapter into the front lens of a photographic camera (thread M52x0.75) or a video camera (use adaptor ring threaded M37x0.75).

2.Remove the rubber eyecup off the monocular.

3.Connect the adapter with the eyepiece and tighten 3 fixing screws on the adapter.

H. Mounting IR-450 to the ATN NVM-14

IR-450 may be mounted on the monocular through the Picatinny adapter.

1.Install the Picatinny Adapter on one of the monocular rails (See cl. 3.4.F).

2.Loosen the IR-450 fixing screw.

3.Mount the IR-450 on the Picatinny Adapter and tighten the fixing screw.

I.Mounting the ATN NVM-14 to the PVS-7 Head/Helmet Mount

To mount the ATN NVM-14 to a head/helmet mount, perform the following:

1. Attach the PVS- 7 headmount adapter (A) to the rail (B) of ATN NVM-14.

E

D

C

A B

Figure 3-7

Attaching ATN NVM-14 to PVS-7 Adapter