Step 5
Windows will now inform you it is ready to install your new driver. Verify that the path is the same as the picture to the left. It should read “C:\WINDOWS\INF\ 1394.INF”
Now click the “Next” button.
Step 6
Congratulations! You are now done with the driver installation. All that is needed from you now is to click the “Finish” but- ton.
2.) CAMCORDER DRIVER INSTALLATION
1.DO NOT PLUG YOUR CAMCORDER INTO THE PYRO BOARD UNTIL YOU HAVE INSTALLED THE CAMCORDER DRIVERS from PYRO CD #1.
2.Insert the PYRO 1394DV CD into your
THE DRIVERS WILL INSTALL ONLY IF YOUR PYRO CARD IS INSTALLED FIRST.
3.If you have Windows ME or Windows 2000 it may not be necessary to install any camcorder drivers.
15