Your First Movies, Starting a New Project

Your First Movies

USING VIDEO WIZARD

BEFORE YOU START: Watch the Tutorials

View the Video Studio Tutorials on PYRO CD #1 – Click Install Video Studio and then click Tutorials.

NOTE: We strongly recommend that your read the Video Studio Manual which is located on PYRO CD #1 and can be viewed by clicking the HELP Button.

When using Video Wizard you must follow these set-up steps before attempting to capture video.

1. Right click in the video preview window

2. Be sure that your camcorder is recognized.

3. Select “Ulead Direct Show Capture Plug-in”

4. Give the project a name.

5. Click – Get Video

6. Push Play on your camcorder. There is no software control of the camcorder in Video Wizard.

7. Click “Begin” to start capturing video.

USING VIDEO STUDIO

NOTE: We strongly recommend that your read the Video Studio Manual which is located on PYRO CD #1 and can be viewed by clicking the HELP Button.

Starting a New Project

1. Click the “New Project” icon in the speaker grill area of the Video Studio interface.

2. Give your project a name.

3. Select the AVI: 720 x 480, 29.97 fps, DV NTSC template for North American users (Select AVI: 720 x 576, 25 fps, DV PAL for Europe, South America and Australia)

4.Use the default location or change the location of where you want