Vertex Standard H.8, H.16 manual Operation after adding a local storage device

Page 54

VerteX RTH Series

H.8 and H.16 Series

real time. Five commands can be executed. Depending on the S/W status, however, some commands cannot be executed.

New

Returns the status of the selected storage device to New; if this command is executed, the

selected storage device will be moved to the {New} storage device manager.

 

 

 

 

 

 

Online

Changes the selected storage device in online state.

 

 

 

 

Offline

Changes the selected storage device in offline state.

 

 

 

 

Format

Format the selected storage.

Eject

Separates the selected device completely from the software.

 

 

 

 

 

 

Physical states supporting the execution of the commands above include Healthy and

 

 

Warning. In fault state, however, no command can be executed.

 

 

 

 

 

 

When removing a hard disk installed in the DVR or storages connected to USB

 

 

port, the user shall execute the {Eject} command.

 

￿ Backup

The backup storage is managed in Backup. Backup storages are not used to store data; rather, they are only used to back up data. The user can execute only the {New} command.

Depending on the storage type, the storage is used only for {Direct} or {Backup} purposes.

(2)Configuration of the local storage device

Model

Model name of the storage device.

 

 

 

Serial

Serial number of the storage device.

 

 

 

Location

Physical location of the storage device.

 

 

 

Capacity(T/F)

Storage device capacity (T: Total; F: Free)

 

 

 

Status(SW/HW)

Storage device status (SW: Software; HW: Hardware)

 

 

 

 

 

 

 

 

There are three software status types.

 

 

 

Active

 

Connected to storage or backup device; currently saving the data.

 

 

 

Online

 

Only connected to storage or backup device.

 

 

 

Offline

 

Not connected to storage or backup device.

 

 

 

 

 

 

 

 

There are three hardware status types.

 

 

 

Healthy

 

Connected to storage or backup device; functions normally.

Warning

 

Connected to storage or backup device, but error was detected; in this case, data

 

storing or backup cannot be made (for more information, see the description below).

 

 

Fault

 

Not connected to storage or backup device; cannot perform data saving or backup.

1.Fault State: The storage device is completely damaged, and none of the S/W operations can be performed. The fault state is not related to a DVR problem. The DVR has detected the fault and stopped the recording.

2.Warning State: The storage device has a physical error that can be corrected by the storage device or by the DVR. If the error is not taken care of, however, the storage device is likely to be damaged (and shift to fault state). Backing up data in the corresponding storage device and replacing the device with a normal one are strongly recommended.

3.If there is an active storage device with a warning or a fault, a message is displayed on the upper left part of the screen.

B.Operation after adding a local storage device

53

Image 54
Contents Rugged Cctv Safety Notes on the DVR Instructions before using the productInstallation Environment of the DVR Safety Notes on the Lithium BatteryDVR Operation Setup Installation and ConnectionOperation and Setup Tools IntroductionSystem Operation Starting and Exiting the SystemPlayback and Playback Speed Control Figure List P/E/N/D/I/XTerminal Block TB1 Vertex RTH-Series Major Features Vertex RTH-16 Vertex RTH-8 Vertex RTH-412BNC H.8 and H.16-Series Major Features About the ProductDVD Vertex RTH-Series Name and Features of Each PartComponents 19’ Rack Size Compact SizeH.8 and H.16-Series Name and Features of Each Part 1. H.8 and H.16-Series Front PanelNot currently offered 3. H.8 Rear Panel 4. H.16 Rear Panel Installation and Connection Basic ConnectionConnected Device DVR Terminal Spot Monitor Connection of Other DevicesSensor / Relay / TTL Output Audio Input/OutputSensor Connection PTZ CameraSensor/Relay /TTL Relay ConnectionVertex RTH-Series Front Button Brand Name and Model NameVertex RTH-Series Remote Controller H.8 and H.16-Series Front Button ModeRemote Controller for H.8 and H.16-Series MouseVertex RTH-Series Storage Installation Type Size Capacity BufferRPM H.8 and H.16-Series Storage Installation Power on Storage SetupLocal Admin User1 1111111 User2 2222222 User3 3333333 User4 Recording Setup Select Menu Æ Setup Æ RecordingScreen View Setup and Others Setup Date/Time SetupCamera / TV Setup External Device SetupStarting the System Starting and Exiting the SystemMonitoring Exiting the SystemUser Account and Authorization System LoginMenu in Monitoring Mode Channel GroupingSystem Information View and Display Setup Change Audio Recording and PlaybackVideo is not connected or Video is covert ※ Functions available for Authorization SetupSystem Information Audio is set activatedCamera Selection for Screen Setup Screen Brightness/Contrast/Hue/Saturation AdjustmentCamera Adjustment TV Adjustment Screen Border AdjustmentCamera Title Shown/Hidden Spot Control Only for Vertex RTH series Relay OutSearch Directory Count Calendar SearchYear/Month/Day Selection EventPlayback Multi-Time SearchMulti-Day Search Forward Frame by Frame Playback and Playback Speed ControlForward Play / Fast Forward Reverse Play / Fast ReverseMulti Time BackupSmart Search Multi DayStatus Bar Display ModeLog Viewer Log TypeRecording Setup RecordingRecording Types Backup in Log Mode Backup in Real-time Monitoring ModeBackup in Search Mode Backup in Playback ModeCommon Backup Procedure 25. Backup WindowConditions for Using the PTZ Features SnapshotPTZ Camera Control PTZ Control Camera PTZ ModeTour feature SpeedTime Server URL Server Type SetupTime Sync OFFTime Zone Date and TimeTime Display Format Daylight Saving TimeStart Time End TimeCamera Title Covert ConnectionNtsc PAL CIF Vertex RTH-8 / H.8 Off AllPartial Select the motion detection sensitivityPreset Action MotionSensor Relay Type MailRecording Schedule Setup Recording ScheduleEnter to Recording Schedule Menu Select Menu Æ Setup Æ Storage StorageLocal Storage Management Private RecordingHDD Overwrite Local Storage Management FunctionOperation after adding a local storage device Operation of the local storage device Direct HDD FormatPTZ Protocol Setup PTZDuration Setup Camera ID setupBaud Rate Setup Tour SetupEthernet Set the system network. Menu Æ Setup Æ NetworkNetwork TCP/IPDdns 47. Ddns Window48. Ddns Window with MAC Address 51. Ddns Status Select Ddns in Menu Æ Setup Æ Network PortSystem MailID for Remote Controller System MenuDVR Name ID For Key Controller UsersMove to Menu Æ Setup Æ System Æ 5. Admin. Password Admin. PasswordUpgrade Move to Menu Æ Setup Æ System Æ 6. UpgradeFactory Setup Error Alarm Action9. RS232C Port Error Alarm Duration Menu Time OutLanguage Honeywell DynacolorHitron Mikami

H.8, H.16 specifications

Vertex Standard, a well-known name in professional communication equipment, offers a series of radios that cater to various needs in the field of audio communication. Two notable models within this line are the H.16 and H.8. Both of these radios are designed to provide reliable communication in demanding environments while ensuring ease of use and advanced features.

The Vertex Standard H.16 is widely recognized for its robust build quality and versatility. This model typically supports a wide range of frequencies, making it suitable for various applications, from industrial to recreational use. One of its standout features is the long battery life, which ensures operators can communicate effectively over extended periods without needing a recharge. The H.16 also boasts an ergonomic design, allowing for comfortable handling during prolonged usage.

Key technologies incorporated in the H.16 include advanced digital signal processing (DSP), which enhances audio clarity by minimizing background noise and improving voice transmission. Additionally, the H.16 often features multiple channel capabilities, enabling users to switch between different communication lines effortlessly. The inclusion of programmable buttons allows users to tailor the functions of the radio to suit their specific tasks, enhancing efficiency.

On the other hand, the Vertex Standard H.8 is another model that excels in delivering dependable performance. This radio is engineered to withstand harsh environmental conditions, making it ideal for outdoor activities and industrial settings. The H.8 typically features rugged housing that is dustproof and water-resistant, ensuring longevity even in challenging climates.

Like the H.16, the H.8 integrates advanced technologies, including noise-cancellation features and user-friendly interfaces. It usually offers a compact design, making it a portable choice for professionals who need to stay mobile. The H.8's reliable connectivity ensures that users can maintain clear communication, which is critical in fast-paced environments.

Both models emphasize ease of use, featuring intuitive controls that minimize the learning curve for new users. These radios are often equipped with built-in safety features, such as emergency alerts and lone worker functions, enhancing user protection in critical situations.

In conclusion, Vertex Standard's H.16 and H.8 radios encompass a blend of durability, advanced technologies, and user-centric designs, making them suitable choices for a variety of professional communication needs. Whether in industry, outdoor exploration, or emergency response, these radios ensure effective communication, contributing to safety and efficiency in the field.