CHANNEL SETUP
This section describes how to set camera properties to get the best picture.
1.Click the Video tab. The Video page appears. Refer to Figure 87.
2.Select the Preview checkbox to see the video quality with the default settings.
3.Adjust the video quality by dragging the triangles on the slider bars to the desired values. Refer to Table C.
4.Click Apply.
NOTE: The bit rate, located under the “Select channel” button, displays the amount of activity in the specified channel. A higher bit rate requires more storage space. It is important to notice the bit rate as you adjust your camera settings to achieve the highest quality picture with the lowest bit rate.
Figure 87. Camera Video Setup Page
64 |
|