ALARM UNIT CONFIGURATION
Follow these steps to configure a
NOTE: This programming is required only on the recorder that is physically connected to the
1.Go to Start > Programs > DX9000 Server > IO Handler Configuration. The following dialog box appears.
NOTE: You can also open the I/O Handler from the DX9000 Server Configuration Utility.
Figure 91. Alarm I/O Handler Configuration Dialog Box
2.Click Select Driver on Device 1 (COM 1) or Device 2 (COM 2) to define the external device that is connected to the recorder. The following dialog box appears.
Figure 92. CM9760 Alarm Driver Dialog Box
3.Select CM9760ALM.dll.
70 |
|