Pelco manual C2953M-B 10/09

Page 11

4.For FCC Class B installations, attach the supplied ferrite to the network cable (refer to Figure 5). The ferrite should be installed on the cable approximately 1 inch (2.54 cm) from the camera’s RJ-45 network port.

Figure 5. Ferrite Installation

WARNING: The ferrite must be installed for the camera to meet FCC Class B compliance standards. Failure to correctly install the ferrite might cause harmful interference to radio communications.

5.Connect the necessary wiring for alarms and relays (refer to Wiring on page 13).

6.Apply power to the camera. The camera will complete a configuration sequence; the green LED flashes five times per second for approximately two minutes and then turns solid after the sequence is complete.

NOTE: If the camera is not connected to a DHCP server and DHCP is enabled, the configuration sequence might take up to five minutes to complete.

7.View the camera image using the service port or a Web browser.

8.Focus the lens:

a.Press the auto back focus button once to center the focus mechanism. The button is located on the side of the camera.

b.Manually adjust the zoom and focus of the lens to the desired field of view (refer to the instructions shipped with the lens).

c.Press and hold the back focus button for three seconds to start the auto back focus mechanism.

C2953M-B (10/09)

11

Image 11
Contents IXE Series Extended Platform Network Camera Contents Specifications C2953M-B 10/09 List of Illustrations Video Quality Caution Important NoticesLegal Notice Regulatory NoticesModels IntroductionBUILT-IN Analytics Getting Started Parts ListProduct Overview Camera Connections and FeaturesRemove Back Cover Product LabelPin InstallationC2953M-B 10/09 Service Cable CAT5 Cable WiringConnecting a Relay Device ALARM, RELAY, and 24 VAC ConnectorSingle Camera Wiring Multiple Camera WiringSupervised Alarms Connecting AlarmsAlarm Connections Minimum System Requirements Camera Configuration SequenceOperation Logging on to the Camera Accessing the IP CameraLive Video Live Video page Icons Multicast Selecting a StreamUnicast Displaying Video in the Multiscreen View Taking a SnapshotAccessing the Camera Menus SettingsSystem Tab General SettingsTime Settings Changing the Device Name Configuring the Time SettingsRebooting the Camera Restoring ALL Camera DefaultsNetwork Tab General Network SettingsSSL Settings SSH SettingsTurning OFF Dhcp Turning on DhcpSelecting the Secure Sockets Layer Mode Generating a SELF-SIGNED Certificate Generating a Certificate RequestEnabling Secure Shell Imaging Tab Configuring the Orientation of the Scene Changing the Digital Processing Settings Selecting Auto Exposure Settings Day Night Settings on Selecting Manual Exposure Settings DAY Night Auto and Manual Modes DAY Night SettingsDAY Night Auto Mode DAY Night Manual ModeConfiguring Auto Focus Settings Configuring Manual Focus Settings Setting Tone MAP Options Selecting Auto White Balance Settings Selecting Manual White Balance Settings Streams Tab Video PresetsVideo Configuration Audio ConfigurationSelecting a Video Preset Configuration Configuring a Custom Video Stream Configuration Compression Standards GOP Structure Endura SigningRate Control ProfileSelecting the Audio Configuration Settings Users Users and Groups TabGroup GroupsDeleting a User Creating a NEW UserEditing a User Deleting a Group Creating a NEW GroupEditing a Group Setting the Camera to Mixed General Settings for Users and GroupsSetting the Camera to Node Sources Events TabHandlers Editing AN Event Source Creating AN Alarm Event SourceCreating a Timer Event Source Creating a System Event SourceCreating AN Event Handler Send Email Deleting AN Event SourceCreating AN Event Handler Upload Jpeg to FTP Server Creating AN Event Handler Write Jpeg to SD CardDeleting AN Event Handler Creating AN Event Handler OPEN/CLOSE RelayEditing AN Event Handler Example Handler Filter Setup Log Off Menu Help MenuGeneral SpecificationsModels Required SystemVideo ElectricalMechanical Physical EnvironmentalProduct Warranty and Return Information