Pelco C2953M-B ALARM, RELAY, and 24 VAC Connector, Single Camera Wiring, Multiple Camera Wiring

Page 14

ALARM, RELAY, AND 24 VAC CONNECTOR

Single Camera Wiring

If PoE is not available:

1.Connect the alarm, relay, and 24 VAC wires to the supplied mating connector (refer to Figure 8). NOTE: Only use the 24 VAC wires if PoE is not available.

2.When finished, attach the mating connector to the green connector on the back of the camera.

Multiple Camera Wiring

If you are operating the camera using 24 VAC and you are wiring more than one camera to the same transformer:

1.Connect one side of the transformer to pin 1 of the 2-position terminal block on all modules.

2.Connect the other side of the transformer to pin 2 of the terminal block on all modules.

NOTE: Failure to connect all modules identically might introduce video noise for some installations.

24V~

RELAY

R1

ALARM

A1

Figure 8. Alarm, Relay, and 24 VAC Connector

Connecting a Relay Device

The camera has an output for activating an external device. It supports both momentary and continuous relay operation.

You can operate the relay interactively during an active connection, or it can operate automatically to coincide with certain events. Typical applications include turning on lights or other electrical devices or activating a door, gate, or lock.

WARNING: Do not exceed the maximum rating of 12 VDC, 0.15 A.

Figure 9 shows how to wire the relay with its power source to the camera.

A1

R1

12 VDC, 150 mA MAX

24V~

Figure 9. Relay Wiring

14	C2953M-B (10/09)

Image 14

Contents IXE Series Extended Platform Network Camera Contents Specifications C2953M-B 10/09 List of Illustrations Regulatory Notices Important NoticesLegal Notice Video Quality CautionModels IntroductionBUILT-IN Analytics Parts List Getting StartedCamera Connections and Features Product OverviewProduct Label Remove Back CoverInstallation PinC2953M-B 10/09 Service Cable Wiring CAT5 CableMultiple Camera Wiring ALARM, RELAY, and 24 VAC ConnectorSingle Camera Wiring Connecting a Relay DeviceConnecting Alarms Supervised AlarmsAlarm Connections Minimum System Requirements Camera Configuration SequenceOperation Accessing the IP Camera Logging on to the CameraLive Video Live Video page Icons Multicast Selecting a StreamUnicast Taking a Snapshot Displaying Video in the Multiscreen ViewSettings Accessing the Camera MenusSystem Tab General SettingsTime Settings Restoring ALL Camera Defaults Configuring the Time SettingsRebooting the Camera Changing the Device NameSSH Settings General Network SettingsSSL Settings Network TabTurning on Dhcp Turning OFF DhcpSelecting the Secure Sockets Layer Mode Generating a Certificate Request Generating a SELF-SIGNED CertificateEnabling Secure Shell Imaging Tab Configuring the Orientation of the Scene Changing the Digital Processing Settings Selecting Auto Exposure Settings Day Night Settings on Selecting Manual Exposure Settings DAY Night Manual Mode DAY Night SettingsDAY Night Auto Mode DAY Night Auto and Manual ModesConfiguring Auto Focus Settings Configuring Manual Focus Settings Setting Tone MAP Options Selecting Auto White Balance Settings Selecting Manual White Balance Settings Audio Configuration Video PresetsVideo Configuration Streams TabSelecting a Video Preset Configuration Configuring a Custom Video Stream Configuration Compression Standards Profile Endura SigningRate Control GOP StructureSelecting the Audio Configuration Settings Users and Groups Tab UsersGroups GroupDeleting a User Creating a NEW UserEditing a User Deleting a Group Creating a NEW GroupEditing a Group Setting the Camera to Mixed General Settings for Users and GroupsSetting the Camera to Node Events Tab SourcesHandlers Creating a System Event Source Creating AN Alarm Event SourceCreating a Timer Event Source Editing AN Event SourceDeleting AN Event Source Creating AN Event Handler Send EmailCreating AN Event Handler Write Jpeg to SD Card Creating AN Event Handler Upload Jpeg to FTP ServerDeleting AN Event Handler Creating AN Event Handler OPEN/CLOSE RelayEditing AN Event Handler Example Handler Filter Setup Help Menu Log Off MenuRequired System SpecificationsModels GeneralVideo ElectricalMechanical Environmental PhysicalProduct Warranty and Return Information