CREATING AN ALARM EVENT SOURCE
1.Place your mouse pointer over the Events tab.
2.Select Sources from the
3.Click in the Name box and type a
4.Select Alarm from the Type
5.Move the Dwell Time slider to set the amount of time in seconds that the alarm is active. The dwell time range is 0.1 to 200 seconds; the default setting is 0.1.
6.Select either normal or reversed from the Polarity
7.Select either true or false from the Supervised
8.Click the Submit button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
CREATING A SYSTEM EVENT SOURCE
1.Place your mouse pointer over the Events tab.
2.Select Sources from the
3.Click in the Name box and type a
4.Select System from the Type
5.Select the Boot check box to activate an event when the camera reboots.
6.Click the Submit button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
CREATING A TIMER EVENT SOURCE
1.Place your mouse pointer over the Events tab.
2.Select Sources from the
3.Click in the Name box and type a
4.Select System from the Type
5.Select the Boot check box to activate an event when the camera reboots.
6.Click the Submit button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
EDITING AN EVENT SOURCE
1.Place your mouse pointer over the Events tab.
2.Select Sources from the
3.Click the source profile that you want to delete from the defined source box located on the left side of the page.
4.Make any necessary changes to the available fields.
5.Click the Submit button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
56 |