Pelco EH3512, EH3515 operation manual EH3508-1/-2/-3 Wiring Diagram

Page 4

7.Pull the video and power cables through the glands or conduit on the bottom of the en- closure. Refer to Tables A and B to determine the size of power wire to use. Refer to Table C for the type of video coaxial cable to use.

8.Attach the cables to the camera.

9.If the enclosure has accessories that require power, connect the power to pins 1 and 2 on the PC Board (refer to Figures 1, 2, and 3 for information about accessory wiring). Connect ground to pin 3 if required.

You can connect the camera power to the PC board if the voltages are the same be- tween the accessories and camera. If you want to connect the camera power to the PC board, connect the camera power to pins 1 and 2. Connect ground to pin 3 if required.

10.If the camera lens is adjustable, extend the lens to its maximum length; verify that the camera is adjusted with the lens a minimum of 1/2 inch from the enclosure window.

11.Tighten the screws that secure the sled to the enclosure.

12.Adjust the glands for a tight fit around the cables.

13.Close the enclosure lid, and latch.

14.Adjust the camera focus and iris if necessary. If you need to adjust the focus and iris manually, open the enclosure lid, adjust the focus and iris, and close the enclosure lid.

INPUT, AC HIGH

1INPUT, AC LOW (NEUTRAL)

2 GROUND

24/120/230 VAC

3

 

4

DEFROSTER

MODELS

5

 

 

6

 

 

7

 

 

8

 

 

9

HEATER

 

10

 

 

Figure 1. EH3508-1/-2/-3 Wiring Diagram

DEFROSTER

120 VAC MODELS

INPUT, AC HIGH

1INPUT, AC LOW (NEUTRAL)

2 GROUND

3

 

4

BLOWER

5

 

6

 

7

 

8

 

9

HEATER

10

 

DEFROSTER

24 VAC MODEL

INPUT, AC HIGH

1INPUT, AC LOW (NEUTRAL)

2 GROUND

3

RED

 

RED

 

4

DIODE

BLOWER

BLK

BLK

5

BRIDGE

 

 

 

6

 

 

CAP

 

7

 

 

 

 

8

 

 

 

 

9

 

HEATER

 

10

 

 

 

 

 

 

DEFROSTER

230 VAC MODEL

 

INPUT, AC HIGH

 

1

INPUT, AC LOW (NEUTRAL)

 

GROUND

 

2

 

3

RESISTOR

NOTE: BLOWER APPLIES

4

120 VAC BLOWER

5

TO -1/-2/-3 MODELS ONLY.

 

6

 

 

7

 

 

8

 

 

9

HEATER

 

10

 

 

 

Figure 2. EH3512-1/-1HD/-2/-2HD/-3/-3HD Wiring Diagram

4

Pelco Manual C478M-L (11/03)

Image 4
Contents Page Important Safeguards and Warnings DescriptionInstallation EH3515-2Blower, 25 watts. CE EH3515-2HDEH3508-1/-2/-3 Wiring Diagram Model Number Input Voltage Accessories Cable Size Cable Distance20 AWG 14 AWG 12 AWG 10 AWGLoad TotalVAMaintenance SpecificationsOperation Camera elevation Lens SizeWarranty and Return Information Revision History

EH3515, EH3512 specifications

The Pelco EH3515 and EH3512 are cutting-edge outdoor surveillance camera housings designed specifically for professional security systems. Known for their rugged construction and reliable performance, these models meet the demands of various surveillance applications in both urban and rural settings.

One of the standout features of the EH3515 and EH3512 is their robust design. Constructed from high-quality aluminum and equipped with an integrated heater and blower, these housings ensure optimal camera operation even in harsh weather conditions. They are rated for IP66 environmental protection, which guards against dust and powerful water jets, making them suitable for diverse environmental challenges.

Both models are designed to accommodate a variety of CCTV cameras, allowing for significant flexibility in surveillance setups. The EH3515 supports larger camera sizes, while the EH3512 is tailored for more compact camera systems, making them ideal for organizations looking to customize their security experience. Their versatile mounting options enable installation on walls, ceilings, or even poles, making them adaptable to various locations and arrangements.

Additionally, the EH3515 and EH3512 feature an adjustable mounting bracket, which simplifies the installation process and provides versatile positioning options. This adaptability allows users to easily adjust camera angles to achieve optimal field of view, ensuring comprehensive coverage of monitored areas.

The housings also come with a clear, tempered glass front to protect internal cameras from scratches and other damage, while also allowing for excellent visibility. This feature is essential for maintaining the integrity of surveillance footage. Furthermore, the models are designed to support infrared lighting, enabling effective night-time surveillance, which enhances security in low-light conditions.

Both models are fully compatible with Pelco’s extensive suite of video management solutions, allowing for seamless integration into existing systems. This compatibility ensures that users can take full advantage of advanced features such as remote monitoring and image enhancement technologies.

In summary, the Pelco EH3515 and EH3512 are superior outdoor camera housings that combine durability, flexibility, and ease of installation. With their weather-resistant design, compatibility with various cameras, and advanced protective features, they stand out as essential components for any effective security system. Organizations seeking reliable and high-quality surveillance solutions will find these models meet and exceed their requirements.