Pelco EH3512 operation manual Installation, Blower, 25 watts. CE, EH3515-2HD

Page 3

EH3512-3

Same as EH3512 except unit is supplied with 230 VAC heater, defroster,

 

and blower, 22 watts.

EH3512-3HD

Same as EH3512 except unit is supplied with 230VAC heater and defroster,

 

13 watts.

EH3515

Enclosure, indoor/outdoor, 15.75-inch (40.00 cm) lower body length. (CE)

EH3515-1

Same as EH3515 except unit is supplied with 120 VAC heater, defroster,

 

and blower, 27 watts.

EH3515-1HD

Same as EH3515 except unit is supplied with 120 VAC heater and defroster,

 

23 watts.

EH3515-2

Same as EH3515 except unit is supplied with 24 VAC heater, defroster, and

 

blower, 25 watts. (CE)

EH3515-2HD

Same as EH3515 except unit is supplied with 24 VAC heater and defroster,

 

23 watts. (CE)

EH3515-3

Same as EH3515 except unit is supplied with 230 VAC heater, defroster,

 

and blower, 32 watts.

EH3515-3HD

Same as EH3515 except unit is supplied with 230 VAC heater and defroster,

 

23 watts.

INSTALLATION

The following items are supplied to mount the enclosure:

21/4-20 x .500-inch hex head screws

2Flat washers

2Split washers

The following items are supplied to mount the camera:

2 1/4-20 x .375-inch Phillips-head screws

Perform the following steps to install the enclosure, camera, and lens:

1.Unlatch and open the lid.

2.Remove the camera sled from the rail.

a.Loosen the screws that hold the camera sled in place.

b.Slide the sled forward so it can be lifted out over the screws.

c.Remove the sled.

d.Remove the parts tied to the sled.

3.If you are wiring the enclosure with cable, remove the glands and nuts from the parts bag and install them in the bottom of the enclosure. If you are wiring the enclosure with conduit, do not install the glands.

4.Attach the enclosure body to the appropriate mount using the instructions provided with the mount.

Attach the enclosure through the threaded mounting holes in the bottom of the enclo- sure. Use the 1/4-20 x .500 screws and washers provided (in the parts bag). Com- pletely tighten the screws to attach the enclosure body to the mounting surface.

5.Attach the camera to the sled with the 1/4-20 x .375-inch Phillips-head screws pro- vided (in the parts bag). You can attach the camera to either side of the sled. The side of the sled to which you mount the camera depends on the type of camera and lens you are attaching.

The edges of the sled are bent–one side up and the other side down. On one side of the sled, the lip is wide; on the other side of the sled, the lip is narrow. In a typical in- stallation, you mount the camera so that the holes in the wide lip of the sled fit over the sled mounting screws.

However, you can elevate the sled if you are installing a camera with a low optical cen- ter line or a camera with a large diameter lens. To elevate the sled (and therefore el- evate the camera), flip the sled over so that the holes in the narrow lip of the sled fit over the sled mounting screws.

6.Move the sled so that the sled mounting screws extend through the narrow part of sled mounting holes, and partially tighten the sled mounting screws.

Pelco Manual C478M-L (11/03)

3

Image 3
Contents Page Description Important Safeguards and WarningsEH3515-2HD InstallationEH3515-2 Blower, 25 watts. CEEH3508-1/-2/-3 Wiring Diagram Cable Size Cable Distance Model Number Input Voltage AccessoriesTotalVA 20 AWG14 AWG 12 AWG 10 AWG LoadCamera elevation Lens Size MaintenanceSpecifications OperationRevision History Warranty and Return Information

EH3515, EH3512 specifications

The Pelco EH3515 and EH3512 are cutting-edge outdoor surveillance camera housings designed specifically for professional security systems. Known for their rugged construction and reliable performance, these models meet the demands of various surveillance applications in both urban and rural settings.

One of the standout features of the EH3515 and EH3512 is their robust design. Constructed from high-quality aluminum and equipped with an integrated heater and blower, these housings ensure optimal camera operation even in harsh weather conditions. They are rated for IP66 environmental protection, which guards against dust and powerful water jets, making them suitable for diverse environmental challenges.

Both models are designed to accommodate a variety of CCTV cameras, allowing for significant flexibility in surveillance setups. The EH3515 supports larger camera sizes, while the EH3512 is tailored for more compact camera systems, making them ideal for organizations looking to customize their security experience. Their versatile mounting options enable installation on walls, ceilings, or even poles, making them adaptable to various locations and arrangements.

Additionally, the EH3515 and EH3512 feature an adjustable mounting bracket, which simplifies the installation process and provides versatile positioning options. This adaptability allows users to easily adjust camera angles to achieve optimal field of view, ensuring comprehensive coverage of monitored areas.

The housings also come with a clear, tempered glass front to protect internal cameras from scratches and other damage, while also allowing for excellent visibility. This feature is essential for maintaining the integrity of surveillance footage. Furthermore, the models are designed to support infrared lighting, enabling effective night-time surveillance, which enhances security in low-light conditions.

Both models are fully compatible with Pelco’s extensive suite of video management solutions, allowing for seamless integration into existing systems. This compatibility ensures that users can take full advantage of advanced features such as remote monitoring and image enhancement technologies.

In summary, the Pelco EH3515 and EH3512 are superior outdoor camera housings that combine durability, flexibility, and ease of installation. With their weather-resistant design, compatibility with various cameras, and advanced protective features, they stand out as essential components for any effective security system. Organizations seeking reliable and high-quality surveillance solutions will find these models meet and exceed their requirements.