1.0 GENERAL
1.1 IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2.Installation shall be done in accordance with all local and national electrical and mechanical codes utilizing only approved materials.
3.Use only installation methods and materials capable of supporting four (4) times the maximum specified load.
4.Use stainless steel hardware to fasten the mount to outdoor surfaces.
5.To prevent damage from water leakage when installing a mount outdoors on a roof or wall, apply sealant around the bolt holes between the mount and mount- ing surface.
The product and/or manual may bear the following mark:
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
Pelco Manual | 1 |