Hard Ceiling

1.Remove the spring paddle flex assembly from the surface mount ring.

2.Remove the surface mount ring from the dome drive as follows (refer to Figure 8 on page 15):

a.Place fingers on the circular marks located on the sides of the surface mount ring.

b.Pinch the sides.

c.Lift and remove the surface mount ring from the dome drive.

3.Attach the spring paddle flex assembly to the dome drive using the two #8-32 x 3.50-inch machine screws (supplied). Thread the screws into the ends of the spring paddle flex assembly so the paddles remain at the end of the screws.

4.Cut a 5-inch diameter hole in the ceiling. You can either use the two holes in the spring paddle flex assembly as a compass tool to mark the 5-inch diameter hole to be cut, or use a 5-inch hole saw.

5.Pull the wiring for power, network, and control through the ceiling.

6.Connect the wiring using one of the following options:

• Plug the network cable into the RJ-45 connector on the side of the dome drive.

• If the network has no PoE, connect a 24 VAC Class 2 power supply to the 24 VAC power connector.

Refer to Figure 10 on page 17 for wiring connections.

7.If you are operating the dome system using 24 VAC and you are wiring more than one dome drive to the same transformer, connect one side of the transformer to pin 1 of the 2-position terminal block on all modules. Connect the other side of the transformer to pin 2 of the terminal block on all modules.

NOTE: Failure to connect all modules identically may introduce noise in the video for some installations.

8.Attach the dome drive to the ceiling, (refer to Figure 9 on page 15).

a.Stabilize the spring paddle flex assembly by applying pressure to the machine screws.

b.With the screws stabilized, insert the spring paddle flex assembly and dome drive into the hole in the ceiling. You may need to insert the dome drive at an angel to allow the ends of the paddle to clear the hole.

NOTE: Be sure to route all wiring away from the spring paddle flex assembly.

c.Once the spring paddle flex assembly has cleared the hole in the ceiling, release the machine screws and allow the spring paddle flex assembly to expand. You do not need to support the dome drive as the ends of the paddle will hold the dome drive in place.

WARNING: Do not overtighten the mounting hardware; doing so can impede the pan movement of the dome drive.

d. Tighten the machine screws completely to secure the dome drive to the ceiling.

9.Line up the tabs on the trim ring with the slots in the dome drive. Snap the trim ring and bubble into place.

16	C3446M (7/08)

SD4N-B1, SD4N-W1, SD4N-B1-X, SD4N-B0-X, SD4N-W0-X specifications

Pelco, a well-established name in the security and surveillance industry, has introduced a range of advanced pan-tilt-zoom (PTZ) cameras under the SD4N series, which includes the models SD4N-W0, SD4N-W1-X, SD4N-W0-X, SD4N-B0-X, and SD4N-B1-X. These cameras are designed to provide high-quality video surveillance for a variety of environments, making them suitable for applications such as transportation hubs, retail spaces, educational institutions, and critical infrastructure.

One of the standout features of the SD4N series is its advanced image quality, which is facilitated by a high-resolution 4 megapixel camera sensor. This allows for clear and detailed images even in challenging lighting conditions, ensuring reliable performance both day and night. The cameras also support a wide dynamic range (WDR) technology, enabling them to capture images in scenes with stark contrasts, such as bright sunlight and deep shadows, without losing detail.

Another key characteristic of the SD4N series is its extensive PTZ capabilities. With a robust motorized mechanism, these cameras can pan up to 360 degrees and tilt to a significant range, allowing for flexible monitoring of large areas. The zoom capabilities, particularly in models like SD4N-W1-X, offer powerful optical zoom options, enabling operators to focus on specific areas of interest without compromising on image quality.

In terms of connectivity, the SD4N models feature advanced networking options, including support for both Ethernet and IP protocols. This allows for seamless integration into existing surveillance systems, facilitating remote access and control. Additionally, these cameras are compatible with various video management systems, providing users with the flexibility to choose the best software that meets their operational needs.

Durability is another significant aspect of the SD4N series. Designed for outdoor applications, these cameras are equipped with weather-resistant enclosures, ensuring reliable operation in various environmental conditions. Whether exposed to rain, snow, or extreme temperatures, the SD4N series is built to withstand the elements, making it a reliable choice for outdoor surveillance.

Finally, the SD4N-W1-X and its counterparts come with integrated analytics capabilities that enhance the overall functionality of the camera. These intelligent features can automatically detect motion, recognize faces, and even classify objects, making surveillance more efficient and proactive. With Pelco's SD4N series, users gain a premium surveillance solution that combines advanced technologies, exceptional image quality, and versatile applications, ensuring security and peace of mind in any setting.