Yamaha RX-V640RDS SOUND 2 SP DISTANCE speaker distance, SOUND 3 LFE LEVEL, Setting by “meters”

Page 45
SOUND 2 SP DISTANCE

SOUND 2 SP DISTANCE

(speaker distance)

Use this feature to adjust the delay applied to center and rear center channel sounds. This feature works when there is sound output from the center speakers with a source such as Dolby Digital or DTS. Ideally, the center speaker and the rear speakers should be the same distance from the main listening position as the left and right main speakers. However, in most home situations, the center speaker or the rear center speaker is placed in line with the main speakers or the rear speakers. By delaying the sound from the center speaker and the rear speakers, you can adjust the apparent distance from the center speaker and the rear speakers to the main listening position to make it seem the same as the distance between the listening position and main left and right speakers.

1 Press u / d to select “UNIT”.

2 Press j / i to select the unit “meters” or “feet” to be used in setting.

3 Press u / d to select the speaker for which you want to adjust the delay.

4 Press j / i to set the delay.

Press i for higher values and j for lower values.

C

L

C

R

RL

RC

RR

RL

 

RR

 

RC

 

SET MENU

SOUND 3 LFE LEVEL

Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The LFE signal carries low- frequency special effect sound which is only added to certain scenes.

Control range:

 

SPEAKER

–20 to 0 dB

HEADPHONE

–20 to 0 dB

Initial setting: 0 dB

 

1 Press u / d to select the item to be adjusted.

2 Press j to adjust the LFE level.

Note

Adjust the LFE level according to the capacity of your subwoofer or headphones.

SOUND 4 D. RANGE

(dynamic range)

Use this feature to adjust the dynamic range. This setting is effective only when the unit is decoding Dolby Digital signals.

Choices: MAX, STD (standard), MIN (minimum)

MAX

Select MAX for feature films.

STD

Select STD for general use.

MIN

Select MIN for listening to sources at low volume levels.

OPERATION

ADVANCED

 

 

Setting by “meters”

Control range:

0.3 to 24.00 m (for main L/R, center,

 

rear L/R, rear center)

Initial settings:

3.00 m (for main L/R, center, rear L/

 

R), 2.10 m (for rear center)

Setting by “feet”

Control range:

1 to 80 ft (for main L/R, center, rear

 

L/R, rear center)

Initial settings:

10.0 ft (for main L/R, center, rear L/

 

R), 7.0 ft (for rear center)

Note

No delay will be set if you set the same distance for the main L/R and center, or the rear L/R and rear center.

English

43

Image 45
Contents RX-V640RDS AV Receiver DSP-AX640SE AV Amplifier MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZINGCAUTION: READ THIS BEFORE OPERATING YOUR UNIT For U.K. customersSpecial Instructions for U.K. Model INTRODUCTION CONTENTSBASIC OPERATION ADDITIONAL INFORMATIONAbout this manual FEATURESInstalling batteries in the remote Supplied accessoriesGETTING STARTED controlCONTROLS AND FUNCTIONS Front panela s d f INTRODUCTION English Remote control Handling the remote control Using the remote controluMUTE iSTEREO/EFFECT~~~~~~~~~~~~~~dB Front panel display0 q w e r t y u i o p aConnecting to digital jacks Before connecting componentsCONNECTIONS EnglishConnecting a video monitor Connecting video componentsConnecting a DVD player/digital TV/cable TV Connecting a recording componentEnglish VCR indicates audio signal directionDVD player TV/digital TV cable TVConnecting a CD player Connecting audio componentsConnecting a CD recorder or MD recorder Connecting a tuner DSP-AX640SEConnecting the AM loop antenna Connecting the antennas RX-V640RDSNotes EnglishConnecting an external amplifier Connecting an external decoderSpeaker placement Connecting the speakersSpeakers EnglishConnections IMPEDANCE SELECTOR switchREAR SPEAKERS terminals MAIN SPEAKERS terminalsCENTER SPEAKER terminals REAR CENTER SPEAKER terminalsTurning on the power Connecting the power supply cordsConnecting the AC power cord AC OUTLETS SWITCHEDUsing the basic menu BASIC SYSTEM SETTINGS1 SETUP Exit4 SET/CANCEL 1 SETUPSET MENU 2 SP LEVELSetting speaker output levels SP LEVEL Setting the unit to match your speaker systemNotes EnglishAUTO PLAYBACKBGV background video function When you have finished using this unitTo mute the sound Night listening modeInput modes and indications Notes on digital signalsAUTO Notes on playing DTS-CD/LDsGeneral AdventureSelecting a sound field program EnglishMatrix PRO LOGICSelecting PRO LOGIC, PRO LOGIC II or Neo:6 Playing Dolby Digital EX or DTS ES materialSILENT CINEMA DSP Virtual CINEMA DSPNormal stereo reproduction NotesUnderstanding sound fields DIGITAL SOUND FIELD PROCESSING DSPHi-FiDSP programs Recreating a sound fieldSound design of CINEMA-DSP CINEMA-DSPCINEMA-DSPPrograms For audio-videosources No. 4 toStraight Decode For movie programsDolby Digital/DTS + DSP sound field effect Sound field effectsDolby Digital EX/DTS-ES+ DSP sound field effect Dolby Pro Logic + DSP sound field effectAutomatic tuning TUNINGManual tuning AAM 1530 kHzAutomatically presetting stations for FM stations Presetting stationsA1:FM 89.9 MHz NotesAAM 1440 kHz Manually presetting stationsC :AM 1440 kHz C3:AM 1440 kHzExchanging preset stations Selecting a preset stationE1:FM 87.5 MHz A5:FM 90.6 MHzDescription of RDS data PS Program Service name modeChanging the RDS mode PTY Program Type modePTY SEEK function To cancel this functionEON function To cancel this functionSetting the sleep timer SLEEP TIMERCanceling the sleep timer SLEEP 120min L RRECORDING Special considerations when recordingDTS material EnglishSET MENU Adjusting the items on the set menuSet menu list 3,5,8SOUND 1 SPEAKER SET speaker mode settings1A CENTER center speaker mode The last setting you adjusted1C REAR LR rear speaker mode 1B MAIN main speaker mode1D REAR CT rear center speaker mode 1E BASS bass out modeSetting by “feet” Setting by “meters”SOUND 2 SP DISTANCE speaker distance SOUND 3 LFE LEVELSOUND 6 HP TONE CTRL SOUND 5 CENTER GEQ center graphic equalizerINPUT 1 I/O ASSIGN input output assignment headphone tone controlOPTION 1 DISPLAY SET INPUT 2 INPUT MODE initial input modeOPTION 2 MEM. GUARD memory guard OPTION 3 AUDIO MUTEOPTION 4 ZONE SET SP B speaker B setNotes Control area REMOTE CONTROL FEATURESControlling this unit Controlling other componentSetting the manufacturer code Clearing setup manufacturer codesNotes Controlling other components Adjusting the volume during playback SETTING THE SPEAKER LEVELSUsing the test tone NotesChanging parameter settings SOUND FIELD PROGRAM PARAMETER EDITINGEnglish Digital sound field parameter descriptions DIMENSIONDSP LEVEL DELAYTROUBLESHOOTING GeneralEnglish Refer to page EnglishTuner Remote controlProblem ProblemDolby Surround GLOSSARYDolby Digital Dolby Pro LogicComponent video signal S-videosignalPCM Linear PCM Sampling frequency and number of quantized bitsAUDIO SECTION SPECIFICATIONSVIDEO SECTION FM SECTIONPage LIFETEC SATELLITE TUNER CABLE TVDVD PLAYER LD PLAYERCD PLAYER CD RECORDER/CD-RW MD RECORDERTAPE DECK WA69980 Printed in Malaysia