TP-Link TL-SC2020 manual  Note

Page 37

Manual background

Select On when you use FTP function. The FTP client Setting screen appears. Select Off, when you do not wish to use the FTP client function.

Note:

The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function.

FTP Server Name: Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server.

User Name: Type the user name for the FTP server.

Password: Type the password for the FTP server.

Re-type Password: To confirm the password, type the same characters as you typed in the Password box.

Passive Mode: Set whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode.

Test: After setting the FTP server information, you can tick the test key to test if the connection between IP CAM and FTP server works.

Effective Period: Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the periodical sending is effective in the schedule setting in the other section.

Select Schedule and click the Schedule button, and the Schedule setting page will appear.

30

Image 37

Contents REV1.0.1 1910010670 TL-SC2020 Wired Network CameraCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTSafety Information Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYChapter 1 Safety Instructions Package ContentsChapter 2 Minimum System Requirement & Product Feature Chapter 3 Using Camera via Web BrowserC. System Requirement - Help to setup System access InternetAppendix ………………………………………………………………………………………35 Europe - EU Declaration of Conformity Note Package ContentsChapter 1 Safety Instructions 2.2 Product Features Chapter 2 Minimum System Requirement & Product Feature2.1 System Requirement  Note2.3 Physical Overview Power LED Indicator2.3.1 Front View 2.3.2 Rear View 2.4 Mount the Camera2.4.1 The Screw Size 2.4.2 Wall and Ceiling Mount 2.5 Hardware Connection3.1 Obtain the IP Address Chapter 3 Using Camera via Web Browserstart using the program 3.2 Windows Web Browser Page Chapter 4 Operating Camera via Mobile Phone 4.2 Using Camera via iPhone4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming Viewing Note 5.1 Home Chapter 5 Configuration of Main MenuSymbols Pause Stop Record Snapshot5.1.3 Digital zoom in/out the image via the monitor window 5.1.2 Snapshot5.1.4 Audio buttons Save Image5.2 Information 5.3 Basic setup5.3.1 Account To add a new account, please follow the steps below 5.3.2.1 TCP/IP 5.3.2 Network5.3.2.2 PPPoE 1 PPPoE Point-to-Point Protocol over Ethernet PPPoE is a network protocol for encapsulating Point-to-Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with ADSL service where individual users connect to the ADSL transceiver modem over Ethernet work. It also widely used in XDSL digital affiliate line such as ADSL, VDSL or SDSL  Periodical Update 5.3.2.3 DDNS Dynamic DNS2. Input all information and follow step by step with DynDNS 4. Type domain in the Hostname field and select sub-domain 5. After typing information, check your DDNS service5.3.2.4 UPnP Universal Plug and Play White Balance 5.3.3 Image Setting5.3.4 Video 5.3.6 Camera setting5.3.5 Audio 5.3.7.1 Motion detection 5.3.7 Events5.3.7.2 e-Mail SMTP  SSL Tick SSL box if the mail server you use has security restriction  Start Time, End Time Specify the Start Time and the End Time 5.3.7.3 FTP Note 5.4 System 5.4.1 Initialize 5.4.2 Date Time 5.5 Language B. Storage Requirement Table - Help to set Recording Storage System AppendixC. System Requirement - Help to setup System Clause EN 60950-1 EN 50392 EN 300 328 V1.6.1 Europe - EU Declaration of ConformityDescription Español Spanish Ελληνική Greek Français French Italiano Italian Svenska Swedish IMPORTANT NOTE FCC Radiation Exposure Statement Federal Communication Commission Interference Statement