TP-Link TL-SC2020 manual Image Setting,  Note, White Balance

Page 31
5.3.3 Image Setting

HTTP Port: Enter the HTTP port number and default HTTP port is 80.

SSL Port: Enter the SSL port number and default SSL port is 443.

RTSP Port: Enter the RTSP port, default value is 554 for computer view.

Note:

UPnP (Universal Plug and Play): connect seamlessly and simplify environments.

UPnP is a set of computer network protocol. It allows devices to the implementation of networks in the home and corporate

5.3.3 Image Setting

The tool bar can be adjusted to optimize video Brightness, Saturation, Contrast, Sharpness and

White Balance.

Brightness: The value range is 0~100. The higher value the brightness is, the brighter the image is.

Contrast: The value range is 0~100. The contrast is a measure of a display system, defined as the ratio of white to black that the system is capable of producing. The higher value the contrast is, the more delicate of color you can have.

Saturation: The value range is 0~100. The saturation of a color is determined by a combination of light intensity and how much it is distributed across the spectrum of different wavelengths. The higher value the saturation is, the more colorful the image will be.

24

Image 31
Contents REV1.0.1 1910010670 TL-SC2020 Wired Network CameraCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTSafety Information Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYChapter 3 Using Camera via Web Browser Package ContentsChapter 1 Safety Instructions Chapter 2 Minimum System Requirement & Product FeatureEurope - EU Declaration of Conformity access InternetC. System Requirement - Help to setup System Appendix ………………………………………………………………………………………35 Note Package ContentsChapter 1 Safety Instructions  Note Chapter 2 Minimum System Requirement & Product Feature2.2 Product Features 2.1 System Requirement2.3 Physical Overview Power LED Indicator2.3.1 Front View 2.3.2 Rear View 2.4 Mount the Camera2.4.1 The Screw Size 2.4.2 Wall and Ceiling Mount 2.5 Hardware Connection3.1 Obtain the IP Address Chapter 3 Using Camera via Web Browserstart using the program 3.2 Windows Web Browser Page 4.1.1 3G Mobile Phone Streaming Viewing 4.2 Using Camera via iPhoneChapter 4 Operating Camera via Mobile Phone 4.1 Mobile Phone Viewing Note Pause Stop Record Snapshot Chapter 5 Configuration of Main Menu5.1 Home SymbolsSave Image 5.1.2 Snapshot5.1.3 Digital zoom in/out the image via the monitor window 5.1.4 Audio buttons5.2 Information 5.3 Basic setup5.3.1 Account To add a new account, please follow the steps below 5.3.2.1 TCP/IP 5.3.2 Network5.3.2.2 PPPoE 1 PPPoE Point-to-Point Protocol over Ethernet PPPoE is a network protocol for encapsulating Point-to-Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with ADSL service where individual users connect to the ADSL transceiver modem over Ethernet work. It also widely used in XDSL digital affiliate line such as ADSL, VDSL or SDSL  Periodical Update 5.3.2.3 DDNS Dynamic DNS2. Input all information and follow step by step with DynDNS 4. Type domain in the Hostname field and select sub-domain 5. After typing information, check your DDNS service5.3.2.4 UPnP Universal Plug and Play White Balance 5.3.3 Image Setting5.3.4 Video 5.3.6 Camera setting5.3.5 Audio 5.3.7.1 Motion detection 5.3.7 Events5.3.7.2 e-Mail SMTP  SSL Tick SSL box if the mail server you use has security restriction  Start Time, End Time Specify the Start Time and the End Time 5.3.7.3 FTP Note 5.4 System 5.4.1 Initialize 5.4.2 Date Time 5.5 Language B. Storage Requirement Table - Help to set Recording Storage System AppendixC. System Requirement - Help to setup System Clause EN 60950-1 EN 50392 EN 300 328 V1.6.1 Europe - EU Declaration of ConformityDescription Español Spanish Ελληνική Greek Français French Italiano Italian Svenska Swedish IMPORTANT NOTE FCC Radiation Exposure Statement Federal Communication Commission Interference Statement